Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Bedding compound

LinkBack Thread Tools Display Modes
Unread 08-31-2013, 06:27 PM
Platinum Member
Join Date: Dec 2005
Posts: 2,483
Re: Bedding compound

Both Devcon Plastic Steel and MarineTex have the least shrinkage when cured as well as resistance to bore cleaners when compared to so many other epoxies. They've got good strength, too.
Reply With Quote
  •   #9  
    Unread 09-05-2013, 08:11 AM
    Silver Member
    Join Date: Jun 2013
    Posts: 192
    Re: Bedding compound

    I have used Devcon for years but switched to Marine-Tex due to the ever increasing cost of Devcon.
    I like them both but to be honest, if cost were not a factor I would still pick Marine-Tex. It just seems to work a little easier for me.

    On a side note, Devcon and I think Marine-Tex have a shelf life and you should pay attention to that.
    Reply With Quote



    Thread Tools
    Display Modes

    All times are GMT -5. The time now is 09:33 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC