Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Barrel Removal

LinkBack Thread Tools Display Modes
Unread 11-04-2013, 10:41 PM
Bronze Member
Join Date: Jul 2012
Location: Greeley ,Colo
Posts: 50
Re: Barrel Removal

I hope you are lucky and that you did not twist your action rails with that raceway wrench. You should only use a good action wrench that clamps on the out side of the forward part of the action when removing a factory barrel. And Howa actions are the tightest that I have removed. Browning actions are just as tight.
Reply With Quote



Thread Tools
Display Modes

All times are GMT -5. The time now is 08:08 AM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC