Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Barrel lapping

LinkBack Thread Tools Display Modes
Unread 03-29-2012, 01:48 PM
rwk rwk is offline
Silver Member
Join Date: Dec 2007
Posts: 130
Barrel lapping

Have any of you folks hand lapped in your own barrel. How did you do it, and what do i need. Rich
Reply With Quote
  •   #2  
    Unread 03-29-2012, 04:26 PM
    Silver Member
    Join Date: Jan 2012
    Posts: 200
    Re: Barrel lapping

    There are a couple of different methods. Lead slug and compund(s) and tight borebrush and wrap and compound(s). There are some white papers out there on it via google. I did it to an old mauser with the wrapped bore brush method once. It cleaned up the barrel very nicely. ( corrosive ammo) As far as any other improvement, not noted in my "project".
    Reply With Quote



    Thread Tools
    Display Modes

    Similar Threads for: Barrel lapping
    Thread Thread Starter Forum Replies Last Post
    Lapping a Barrel? Pbailey Long Range Hunting & Shooting 4 10-10-2011 04:05 PM
    Lapping a Barrel? kc Gunsmithing 14 06-09-2011 07:32 AM
    Hand lapping vs. fire lapping vs. traditional barrel break in .260 Rem Rifles, Bullets, Barrels & Ballistics 3 02-25-2011 11:08 AM
    Barrel Lapping whopperstopper Rifles, Bullets, Barrels & Ballistics 5 10-12-2010 07:14 AM
    Barrel Lapping Compounds J E Custom Gunsmithing 7 07-01-2007 08:31 AM

    All times are GMT -5. The time now is 04:04 AM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC