Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

Accumark Trigger Adjustment

 
LinkBack Thread Tools Display Modes
  #1  
Old 06-27-2007, 08:50 PM
Bronze Member
 
Join Date: Jun 2007
Posts: 57
Accumark Trigger Adjustment

Kinda dumb question, but was wondering if someone could tell me how to adjust the trigger on my accumark. It has a allen screw in front of the trigger, and I fooled with it a little but it hasn't changed anything. Want to lighten it up a little, don't want to mess something up. Thanks.
Reply With Quote
  #2  
Old 06-28-2007, 05:07 AM
Junior Member
 
Join Date: Jun 2007
Location: 'Bama, USA
Posts: 15
Re: Accumark Trigger Adjustment

CD-
The front screws are typically used to adjust the weight of pull..so in backing the screw out, you'll decrease some perceived friction-tension on the forward movement of the trigger.

Take small steps- back your screw out in 1/4 turns increments, then cycle the bolt hard to detect any possible mishaps. But if you should run the screw out too far and it shoots free, be sure to work in a well-lit room and a table with a white table cloth. It doesn't make for a good day to have a spring take flight on ya..

HTH
__________________
Go Ahead- Melt the Copper Off. . .
Reply With Quote
  #3  
Old 06-28-2007, 06:38 AM
Bronze Member
 
Join Date: Jun 2007
Posts: 57
Re: Accumark Trigger Adjustment

Thanks. I guess it's OK then to remove the stock from the barreled action, to adjust the trigger? I was worried that would somehow change my POI. Still learning this stuff.
Reply With Quote
  #4  
Old 06-28-2007, 09:00 AM
Platinum Member
 
Join Date: Apr 2003
Location: North Bend, Oregon
Posts: 1,201
Re: Accumark Trigger Adjustment

We can set it from 15 ounces to 4 pounds. If we change the spring we can go much lower. I can get you to 2 pounds without taking it out of the stock. Weatherby's come with the best factory triggers.
__________________
Build a man a fire and you heat him for a day.
Set him on fire and you heat him for life.

Only accurate rifles are interesting.

Gordy and Brady.
Reply With Quote
  #6  
Old 06-28-2007, 02:18 PM
Bronze Member
 
Join Date: Jun 2007
Posts: 57
Re: Accumark Trigger Adjustment

Thanks for the help. I think I've got it better than it was, don't want to back it out any further, the screw is a little loose now. It took a fair number of turns on it though, to show any improvement, by feel, since I don't have a scale.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Accumark Trigger Adjustment
Thread Thread Starter Forum Replies Last Post
Howa Trigger adjustment How to. Kiwi Nate Gunsmithing 25 03-31-2014 04:30 PM
Mod. 70 trigger adjustment Ullrich Member Introductions 0 05-21-2011 11:01 AM
Remmy SPS Trigger Adjustment - HELP! Hicks Gunsmithing 6 08-27-2009 12:54 PM
Browning 78 trigger adjustment Rusty49 Gunsmithing 1 10-14-2008 09:38 PM
A-Bolt Trigger Adjustment Slopeshunter General Discussion 6 08-08-2006 06:52 AM

Current Poll
In the last 12 months, what was your longest rifle kill on big game?
0 to 200 yards - 25.93%
1,531 Vote
201 to 400 yards - 32.13%
1,897 Vote
401 to 600 yards - 23.10%
1,364 Vote
601 to 800 yards - 10.01%
591 Votes
801 to 1,000 yards - 3.91%
231 Votes
Over 1,000 yards - 4.91%
290 Votes
Total Votes: 5,904
You may not vote on this poll.

All times are GMT -5. The time now is 02:55 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC