Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

700 ultramag to STW??

 
LinkBack Thread Tools Display Modes
  #8  
Old 02-02-2008, 06:14 PM
Silver Member
 
Join Date: Aug 2006
Posts: 163
Quote:
Originally Posted by wnroscoe View Post
I'd research it closley before I ordered the receiver. Thats just my .02 worth.

That's the whole idea behind this thread.......I want to know from someone that has either done it or knows for a fact it won'r work......
Reply With Quote
  #9  
Old 02-02-2008, 10:18 PM
Silver Member
 
Join Date: May 2007
Location: California
Posts: 458
Why don't you just e-mail or call a riflesmith like Kirby Allen and ask him :confused:
Reply With Quote
  #10  
Old 02-03-2008, 08:19 AM
Silver Member
 
Join Date: Aug 2006
Posts: 163
Since Kirby is on the board most days, I figure he will answer if he knows......that's what this particular forum is for.....to ask gunsmithing questions....right???
Reply With Quote
  #11  
Old 02-03-2008, 12:21 PM
Bronze Member
 
Join Date: Oct 2006
Posts: 85
buzz, guys on here are just giving your there thoughts... calm down.. If you need to know quick, pick up the phone and call Shawn Carlock at Defensive Edge. He can tell you.
Reply With Quote
  #12  
Old 02-03-2008, 01:41 PM
Junior Member
 
Join Date: Nov 2006
Posts: 29
Quote:
Originally Posted by buzzgun View Post
That's the whole idea behind this thread.......I want to know from someone that has either done it or knows for a fact it won'r work......
OK, stop whining. Why don’t you go to Wal-Mart or some where else and purchase one of the cheap, $350.00, 7mmRM's and use that as a donor action???? I simply gave you info I had. My concern is since the feed rails are wider on an RUM than they are on a Belted Magnum it may cause feeding problems. Just how many times has "your friend" needed a follow up shot from an STW anyway?? Lighten up, this only the internet. If the answers aren’t good enough pick up the phone and make a call.
Reply With Quote
  #13  
Old 02-03-2008, 03:28 PM
Silver Member
 
Join Date: Aug 2006
Posts: 163
Quote:
Originally Posted by banded View Post
buzz, guys on here are just giving your there thoughts... calm down.. If you need to know quick, pick up the phone and call Shawn Carlock at Defensive Edge. He can tell you.
Calm down??? I'm not a bit excited........I simply asked a question.....why would you assume (incorrectly) that I need to calm down???
Reply With Quote
  #14  
Old 02-03-2008, 03:59 PM
Silver Member
 
Join Date: Feb 2005
Posts: 109
I'm sorry I didn't explain it right we built them on Remington & Sako mag actions. I still don't think you will have any problems but I know you won't if you go with a 416 mag action.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 700 ultramag to STW??
Thread Thread Starter Forum Replies Last Post
375HH mag or 375 ultramag? EastHunter Rifles, Bullets, Barrels & Ballistics 29 08-03-2014 02:10 PM
7 mm ultramag load? morhuntin Reloading 2 09-10-2009 08:00 PM
700SPS 300 ultramag mooser Guns For Sale 2 12-05-2007 07:50 AM
300 ultramag marccurrier Rifles, Bullets, Barrels & Ballistics 5 10-19-2004 02:32 AM
Will Rem 700 SS-DM fit Ultramag case? Sheldon Long Range Hunting & Shooting 2 11-02-2002 12:44 AM


All times are GMT -5. The time now is 06:43 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC