Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

700 ejector problems

 
LinkBack Thread Tools Display Modes
  #8  
Old 09-26-2011, 06:57 PM
Boe Boe is offline
Junior Member
 
Join Date: Jul 2010
Posts: 18
Re: 700 ejector problems

Did you have problems with the factory 700 extractor? What was the reason for changing it? Instead of turning the scope you can tune the extractor and ejector to stop it from hitting the turret. Boe
Reply With Quote
  #9  
Old 09-26-2011, 08:04 PM
Silver Member
 
Join Date: Feb 2010
Location: Alaska
Posts: 332
Re: 700 ejector problems

Not extractor its the ejector the sako extractor is installed at a different angle on the bolt which causes the brass to eject high to cure it dual ejector or plunger is required which will lower the angle to clear the scope adjustment. Sent the bolt to Christinsen Arms for installation

Last edited by alaska; 09-26-2011 at 08:10 PM.
Reply With Quote
  #10  
Old 09-26-2011, 09:12 PM
Boe Boe is offline
Junior Member
 
Join Date: Jul 2010
Posts: 18
Re: 700 ejector problems

Yes, I know the extractor is installed at a different angle. But if you make a 45 degree cut on the corner of the extractor it will change the angle that the spent brass is launched from the port. On some of them you can use more spring tension on the ejector and that will cure the problem. I have fixed many sako extractor problems that have come from other Custom Rifle Shops. I have never had the need to install dual ejectors. Dual extractors in a factory chamber will just add another problem. Boe
RICHARD HILTS
HILTS CUSTOM RIFLES
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 700 ejector problems
Thread Thread Starter Forum Replies Last Post
Rem ejector/extractor prob? hnts4fun Rifles, Bullets, Barrels and Ballistics 4 11-14-2009 12:27 PM
Savage ejector spring problems britz Gunsmithing 10 12-13-2008 09:59 AM
Ooops, Need ejector options winmagman General Discussion 2 02-23-2007 07:13 PM
Disappearing ejector marks winmagman Rifles, Bullets, Barrels and Ballistics 2 07-19-2004 11:43 PM
remington 700 ejector problem Wi whitetail The Basics, Starting Out 8 07-11-2004 06:46 PM

Current Poll
In the last 12 months, what was your longest rifle kill on big game?
0 to 200 yards - 25.99%
1,546 Vote
201 to 400 yards - 32.14%
1,912 Vote
401 to 600 yards - 23.03%
1,370 Vote
601 to 800 yards - 10.04%
597 Votes
801 to 1,000 yards - 3.92%
233 Votes
Over 1,000 yards - 4.89%
291 Votes
Total Votes: 5,949
You may not vote on this poll.

All times are GMT -5. The time now is 04:33 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC