Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

700 ejector problems

 
LinkBack Thread Tools Display Modes
  #1  
Old 08-25-2011, 04:17 PM
Silver Member
 
Join Date: Feb 2010
Location: Alaska
Posts: 338
700 ejector problems

Just installed a brownells mag sako extractor and now the brass won't eject. I installed a wolff ejector powerspring but still did not fix the ejection problem less than 30 rounds thru this rifle cleaned and oiled the ejector hole everthing looks fine. Puzzled in Alaska!
Reply With Quote
  #2  
Old 08-25-2011, 05:57 PM
Bronze Member
 
Join Date: Aug 2011
Location: Laredo, TX
Posts: 50
Re: 700 ejector problems

Did you solder a bushing with it. checkout kevin cram video on you tube. this might be or fix your issue.

He is the owner of Mountor custom rifles.
Reply With Quote
  #3  
Old 08-25-2011, 07:13 PM
Silver Member
 
Join Date: Aug 2008
Posts: 105
Re: 700 ejector problems

Quote:
Originally Posted by alaska View Post
Just installed a brownells mag sako extractor and now the brass won't eject. I installed a wolff ejector powerspring but still did not fix the ejection problem less than 30 rounds thru this rifle cleaned and oiled the ejector hole everthing looks fine. Puzzled in Alaska!

we have been dealing with that for a time, we sent the bolt to Kevin(montour custom rifles) by the way fast and excellent work, he installed a bushing in the bolt to get the appropiate dimensions, then we installed a wolff spring and got the things much better, check that lil plunger seems to bent a lil and does not give the appropiate tension to de extractor.
now the rifle ejects the spent cases ok but seems to eject them downwards, cause the relation extractor-ejector.
There are a lot of opinions about the matter but I like better the original Remy
extractor.
Reply With Quote
  #4  
Old 08-25-2011, 08:35 PM
Gold Member
 
Join Date: Apr 2010
Location: NW Mt.
Posts: 600
Re: 700 ejector problems

If pushing the case out with a cleaning rod is tougher than it should be polish out the chamber with a fine emory flapper wheel. Doesn't take much of a rough spot to stick
cases.
Reply With Quote
  #5  
Old 08-25-2011, 09:35 PM
Silver Member
 
Join Date: Feb 2010
Location: Alaska
Posts: 338
Re: 700 ejector problems

The new sako extractor changed the angle the ejector was throwing the brass out causing it hit the scope adjustment turrent

just twisted the scope and she is kicking them out now !

Thanks for the replys.

Back to normal in Alaska!

Last edited by alaska; 08-25-2011 at 09:41 PM.
Reply With Quote
  #6  
Old 08-26-2011, 11:34 AM
Silver Member
 
Join Date: Jan 2011
Location: Bozeman, MT
Posts: 160
Re: 700 ejector problems

Quote:
Originally Posted by alaska View Post
The new sako extractor changed the angle the ejector was throwing the brass out causing it hit the scope adjustment turrent

just twisted the scope and she is kicking them out now !
Sooo......your reticle isn't level any more?!!
Reply With Quote
  #7  
Old 09-20-2011, 12:02 PM
Silver Member
 
Join Date: Feb 2010
Location: Alaska
Posts: 338
Re: 700 ejector problems

Yes its the same just ajustments are different
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 700 ejector problems
Thread Thread Starter Forum Replies Last Post
Rem ejector/extractor prob? hnts4fun Rifles, Bullets, Barrels & Ballistics 4 11-14-2009 12:27 PM
Savage ejector spring problems britz Gunsmithing 10 12-13-2008 09:59 AM
Ooops, Need ejector options winmagman General Discussion 2 02-23-2007 07:13 PM
Disappearing ejector marks winmagman Rifles, Bullets, Barrels & Ballistics 2 07-19-2004 11:43 PM
remington 700 ejector problem Wi whitetail The Basics, Starting Out 8 07-11-2004 06:46 PM


All times are GMT -5. The time now is 01:24 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC