Re: 7 WSM, repeater??
I have built a bunch of them on short actions with AI bottom metal...no feeding issues at all. Notch the feed ramp for the bullet tip, polish the feed ramp. On a long magnum action, nothing will probably need to be done.
Just a note, you don't need a long action to run the 168's or 180's. They will work just fine in a short action. If you want to seat them out further, Seekins makes a WSM detachable mag setup. Otherwise Accurate AI mags allow 2.98", which works just fine if the reamer is setup correctly.
Last edited by TMR; 10-11-2010 at 06:35 PM.
Reason: added info