close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing

Reply

6.5x55 Bedding a McMillan A5

LinkBack Thread Tools Display Modes
  #15  
Unread 09-19-2007, 08:00 PM
Silver Member
 
Join Date: Oct 2004
Location: california
Posts: 362
all i can say about joel is !his stocks are the best i have had the pleasure to work on

thanks guys wildcat i did all the work on it there a thread in the longe range hunting thread it tells what i did .second page

JIM
Reply With Quote
  •   #16  
    Unread 09-22-2007, 07:20 AM
    Gold Member
     
    Join Date: Dec 2002
    Location: mathias wv
    Posts: 987
    another of joel's stocks

    My 6.5 Gibbs
    RR
    __________________
    Born to Hunt, Forced to Work!
    Reply With Quote

      #17  
    Unread 10-01-2007, 08:44 PM
    Silver Member
     
    Join Date: Apr 2007
    Location: Eastern Oregon
    Posts: 371
    This might be a dumb question, but I've been wondering what is the idea with the notch cut out behind the heel of the rifle on the A-5 stock? Is that to fit a bunny ear bag?
    Reply With Quote
      #18  
    Unread 10-03-2007, 09:59 PM
    Bronze Member
     
    Join Date: Apr 2006
    Posts: 48
    Quote:
    Originally Posted by Flybuster View Post
    This might be a dumb question, but I've been wondering what is the idea with the notch cut out behind the heel of the rifle on the A-5 stock? Is that to fit a bunny ear bag?
    From a prone supported position, I will put my left hand there (I'm a right hand shooter) to do two things, one pull the rifle into my shoulder and two, to raise and lower my aim.
    __________________
    www.Mormon.org
    Reply With Quote
      #19  
    Unread 10-04-2007, 06:32 PM
    Silver Member
     
    Join Date: Apr 2007
    Location: Eastern Oregon
    Posts: 371
    Thanks for clarifying that DesertDiesel, good looking stock though.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 6.5x55 Bedding a McMillan A5
    Thread Thread Starter Forum Replies Last Post
    Glass bedding vs. Pillar Bedding summitsitter The Basics, Starting Out 7 06-20-2013 01:09 AM
    Bedding a stock with Aluminum bedding blocks? Atlas 00 Gunsmithing 1 07-20-2011 03:38 PM
    McMillan Edge Stock bedding? fordnutter Gunsmithing 1 06-26-2009 04:18 PM
    Pillar bedding / McMillan A-5 J,K, Gunsmithing 2 04-18-2009 04:50 PM
    Skim bedding an aluminum bedding block. Ankeny General Discussion 19 05-27-2006 10:07 PM


    All times are GMT -5. The time now is 03:47 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC