Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


338 id

LinkBack Thread Tools Display Modes
Unread 10-19-2011, 12:34 AM
Bronze Member
Join Date: Jan 2011
Posts: 40
338 id

Just wanted to double check what size I need to finish my muzzle break ID of my 338 Edge build to,
Thanks for any help
Reply With Quote
  •   #2  
    Unread 10-19-2011, 12:55 PM
    Platinum Member
    Join Date: Apr 2010
    Location: Allen, TX
    Posts: 2,608
    Re: 338 id

    The brake ID should be .020" greater than bore diameter.

    .338+.020=.358" - is close to ideal

    It's not recommended that you go less and you really don't want to go more than .030" over.

    -- richard
    Reply With Quote



    Thread Tools
    Display Modes

    All times are GMT -5. The time now is 09:45 AM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC