Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


338 edge question

LinkBack Thread Tools Display Modes
Unread 06-26-2012, 09:34 PM
Junior Member
Join Date: May 2006
Posts: 19
338 edge question

I have a mcmillan stock for a rem long action that is inletted for the badger m5 bottom metal, is there a bottom metal for the 300 ultra/338 edge that will be close to that inletting, or maybe a aics mag that will work with badger bottom metal, I have looked around and can not find a definetive answer
Reply With Quote

Unread 07-01-2012, 11:16 AM
Platinum Member
Join Date: Apr 2010
Location: Allen, TX
Posts: 2,608
Re: 338 edge question

Check with PTG.

They reference "M5 style" on some of theirs, but not sure what that really means...
Pacific Tool & Gauge, Inc. - Remington Performance Parts

-- richard
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: 338 edge question
Thread Thread Starter Forum Replies Last Post
338 Edge question lineman69 Reloading 0 03-13-2011 05:47 PM
338 Edge Question tunacan Gunsmithing 2 03-19-2009 04:25 PM
338 Edge question Ksmirk Gunsmithing 4 03-08-2009 06:52 PM
338 Edge OAL question montana_native Rifles, Bullets, Barrels & Ballistics 7 11-28-2008 02:37 AM
338 edge question michael A. Reloading 11 01-16-2008 12:02 PM

All times are GMT -5. The time now is 11:22 PM.

All content ©2010-2015 Long Range Hunting, LLC