Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


Reply

.300 Rem sendro extractor issue

 
LinkBack Thread Tools Display Modes
  #8  
Old 12-27-2013, 07:19 PM
Silver Member
 
Join Date: Mar 2008
Location: PA
Posts: 341
Re: .300 Rem sendro extractor issue

I thought maybe you did not have to on a mini but if you look on PTG it states it in the product description. Just replaced a factory one that was weak. Factory one can be tricky to get right though.
Reply With Quote
  #9  
Old 12-29-2013, 03:03 PM
Junior Member
 
Join Date: Jan 2011
Posts: 10
Re: .300 Rem sendro extractor issue

Going to call Kampfield on monday for info on fixing my bolt.
Thanks guys
Reply With Quote
  #10  
Old 12-29-2013, 05:34 PM
Silver Member
 
Join Date: Oct 2007
Location: Flat Rock, Michigan, USA
Posts: 137
Re: .300 Rem sendro extractor issue

Do you by chance have longitudinal scratches on your brass?
Reply With Quote
  #11  
Old 12-29-2013, 06:13 PM
Junior Member
 
Join Date: Jan 2011
Posts: 10
Re: .300 Rem sendro extractor issue

No scratches that I can. Tell, the screws for the scope rail are not protruding into the chamber.
I shot it yesterday and 3 fail to extract . Lot of brass slivers around extractor, loads are mid power reloads.not hard to close bolt on trimmed to book spec, I'm at a loss on what issue is, done research and thinking on m 16 style extractor
Reply With Quote
  #12  
Old 12-29-2013, 06:31 PM
SPONSOR
 
Join Date: Mar 2010
Location: on the Southern Plains
Posts: 1,204
Re: .300 Rem sendro extractor issue

There is a simple 'fix' for that Remington extractor. It's a whole lot cheaper than having bolt alterations done, too.
__________________
"Shoots real good!": definition; it didn't blow-up in my face. Not everything can be fixed on an internet forum!
Reply With Quote
  #13  
Old 12-29-2013, 07:08 PM
Junior Member
 
Join Date: Jan 2011
Posts: 10
Re: .300 Rem sendro extractor issue

Short grass
What is it?
Reply With Quote
  #14  
Old 12-29-2013, 07:20 PM
Platinum Member
 
Join Date: Jan 2009
Location: Rochester, NY
Posts: 1,485
Re: .300 Rem sendro extractor issue

Yeah Shortgrass! Give it up!!

Thanks for chiming in.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 11:10 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC