Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Gunsmithing


243 to 6mm Rem

LinkBack Thread Tools Display Modes
Unread 05-27-2013, 11:52 AM
Platinum Member
Join Date: Jun 2010
Location: greenwood, IN
Posts: 3,808
Re: 243 to 6mm Rem

Originally Posted by Booney View Post
Tricky I was going to go the AI roughy I should have specified that but I don't under stand what you mean when you say clean up.
the Winchester case is actually fatter by design than the Remington's use of the 7x57 Mauser case. (or is the 6.5 Mauser? Don't remember). The Remington case is longer with a lot more taper than the Winchester. I thought it'd clean up like others, but was smart enough to draw them both up on the computer. They just will not clean up. The winchester taper is about .012" per inch, and the Remington's taper is .027" per inch. And Ackley almost always uses .010" per inch. All these cases start out with a .47" case head, but also use different amounts of taper in them
Reply With Quote



Thread Tools
Display Modes

All times are GMT -5. The time now is 11:20 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC