Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Hunting > Bowhunting


Reply

having issues

 
LinkBack Thread Tools Display Modes
  #1  
Old 01-06-2010, 06:52 PM
Silver Member
 
Join Date: Jun 2008
Location: christchurch, nz
Posts: 380
having issues

ok so i got a new toy. a second hand pes typhoon bow. the issue that im having is i cant get the sight low enough with out it interfering with the fletching. if i leave the sight perpendicular with the bow then my lowest pin will only allow me to go out to like 20yrd. that just wont do. am using a true glow sight and muzzy xcelerator drop away rest.
not sure if this is explained very well. but anyone have similar issues?what solutions?
Reply With Quote
  #2  
Old 01-06-2010, 10:32 PM
Platinum Member
 
Join Date: Dec 2009
Location: NW MT
Posts: 2,587
Re: having issues

Not familar with the bow but going for the obvious. The site bracket has adjustment as do the pins, move to gain most clearance. Some bows have alternate site mount locations, for different shooters size. Is REST above center shot IE to high? Is nock point location also center shot or close?Set up doesnt sound normal. I HAVE PIN GUARD low on some of my bows, so I CAN HAVE A LONG PIN , so this at some point will hit fletching. But I GET 80-100 YRS,w/pin
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: having issues
Thread Thread Starter Forum Replies Last Post
TAC 15 Issues jbmm411 PSE TAC 15/15i Crossbow Hunting Forum 7 12-08-2010 03:13 PM
DPMS 260 issues? Broz Equipment Discussions 33 10-29-2010 09:57 AM
Accuracy Issues Huvik Long Range Hunting & Shooting 5 09-14-2010 05:48 PM
22-250 issues- help? peppy1hunting Reloading 2 11-28-2008 09:35 AM
Scope Issues!!! ktmhk53 Long Range Scopes and Other Optics 3 03-22-2003 07:52 PM


All times are GMT -5. The time now is 06:56 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC