close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Muzzleloader Hunting

Muzzleloader Hunting Techniques For Muzzleloader Hunting

Reply

TC Impact trigger, free floating, and bedding

LinkBack Thread Tools Display Modes
  #15  
Unread 06-10-2014, 10:21 AM
Bronze Member
 
Join Date: Jun 2014
Posts: 45
Re: TC Impact trigger, free floating, and bedding

Those groups were actually prior to doing any modifications. Only thing aftermarket was the spin jag I used to load the bullets.
Reply With Quote
  •   #16  
    Unread 06-10-2014, 12:51 PM
    Bronze Member
     
    Join Date: Jun 2014
    Posts: 45
    Re: TC Impact trigger, free floating, and bedding

    Sorry for the photos being inverted. I do not know why that keeps happening. I cleaned all of the burrs off of the reciever today to prep for glass bedding.
    attach]35542[/attach]

    TC Impact trigger, free floating, and bedding-photo-2-2.jpg
    I also completed the trigger clean up and all I can say is... WOW. What a huge difference. I am going to measure it but it is unbalievably crisp and breaks with no creep. I let a buddy pull the trigger on it and he was absolutely shocked. I polished the trigger, sear, and all pins. Then applied a lied film of grease to all contacting points.
    ttach]35544[/attach]

    TC Impact trigger, free floating, and bedding-photo-4-4.jpg

    TC Impact trigger, free floating, and bedding-photo-5-2.jpg
    Attached Thumbnails - Click to View Larger
    TC Impact trigger, free floating, and bedding-photo-1-2.jpg   TC Impact trigger, free floating, and bedding-photo-3-2.jpg  

    Reply With Quote

      #17  
    Unread 06-12-2014, 06:54 AM
    Bronze Member
     
    Join Date: Jun 2014
    Posts: 45
    Re: TC Impact trigger, free floating, and bedding

    Well I sat down last night, drank a cold one and installed the pillar in the butt stock. Nothing too exciting to look at butt i figured i would document. I used the same type original JB WELD.
    TC Impact trigger, free floating, and bedding-photo-1.jpg
    Pillar coated in epoxy
    TC Impact trigger, free floating, and bedding-photo-2-3.jpg
    pillar support in butt stock coated in epoxy
    TC Impact trigger, free floating, and bedding-photo-3.jpg
    installed pillar and secured
    TC Impact trigger, free floating, and bedding-photo-4.jpg
    Be sure to clean up any excess that sqeezes out!
    TC Impact trigger, free floating, and bedding-photo-5.jpg
    Reply With Quote
      #18  
    Unread 06-13-2014, 08:25 AM
    Bronze Member
     
    Join Date: Jun 2014
    Posts: 45
    Re: TC Impact trigger, free floating, and bedding

    Well i was able to seperate the butt stock from the reciever last night. it turned out pretty good. Now all thatbi need to do is prep for bedding and bed it. That should be early next week as it is my birthday saturday.
    TC Impact trigger, free floating, and bedding-photo-1-2.jpg
    Pre cleanup
    TC Impact trigger, free floating, and bedding-photo-2.jpg
    post cleanup
    TC Impact trigger, free floating, and bedding-photo-3-2.jpg
    post cleanup
    TC Impact trigger, free floating, and bedding-photo-4-2.jpg
    Reply With Quote
      #19  
    Unread 06-13-2014, 02:08 PM
    Gold Member
     
    Join Date: Apr 2011
    Location: Near a lake with no fish
    Posts: 682
    Re: TC Impact trigger, free floating, and bedding

    Look'n good, keep'er up.

    Happy Birthday by the way
    Reply With Quote
      #20  
    Unread 06-14-2014, 07:50 AM
    Bronze Member
     
    Join Date: Jun 2014
    Posts: 45
    Re: TC Impact trigger, free floating, and bedding

    Thank you very much Encore. This is my first attempt at performing any custom work on a gun so it has been fun! I can't wait to get it to the range and see if all of this work actually gives me some results on paper!
    Reply With Quote
      #21  
    Unread 06-14-2014, 08:45 PM
    Silver Member
     
    Join Date: Feb 2013
    Location: The Dam, WI.
    Posts: 138
    Re: TC Impact trigger, free floating, and bedding

    Can't wait to see what happens. I guess I was lucky with my Encore ML shoots the bulls out at 100 yds. Nothing special 100 gr. 777 with TC 250 gr. ez slide sabots the yellow ones and Win. 209 primer. So is a customized barrel the next order if this doesn't work?
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 08:12 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC