finaly hit the 300+

[killahog]

Rifleshooter can you explain how to use the pda and exbal program and How is that system quicker than using come up charts. I have so many varmint rifles that I struggle to remember holdover on most of them so recently I just grab my 223AI. If I had a small PDA that could carry all the Information of all my rifles I might be more Inclined to carry one of my 220 swifts or My 25-06AI more often. Thanks Tony

[rifleshooter]

Killahog hope this helps
once you have downloaded Exbal onto your pda the following is how i used it
http://i281.photobucket.com/albums/k...Picture046.jpg this is the first screen you see,tap the bullet data
http://i281.photobucket.com/albums/k...Picture045.jpg
then enter all the relevant data,taping enter on each catagory untill you reach the last then tap next
then enter all the field conditions as previous screen
http://i281.photobucket.com/albums/k...Picture044.jpg
again tap enter this will take you to target engagment
http://i281.photobucket.com/albums/k...Picture049.jpg
enter range and wind conditions then tap calculate
http://i281.photobucket.com/albums/k...Picture050.jpg
this will take you to the following screen then if you tap table it gives you a full table of ranges and calculations
http://i281.photobucket.com/albums/k...Picture051.jpg
hope this helps

[killahog]

Well Thats just Nifty. I am going show this post to my yuppyvarminter friend he has become one with a computer and could probably help me shop for a pda. Thank you for taking the time to post all those pictures Tony

[rifleshooter]

No problem only to glad it was of help just orderd the pc version from perry systems, now go get that pda and blast those varmints keep me informed how you get on if thats ok
should have added this info as well but you probably will get all info with program
http://i281.photobucket.com/albums/k...Picture052.jpg
in the top left click exbal options
http://i281.photobucket.com/albums/k...Picture053.jpg
then tap sight adjust options
http://i281.photobucket.com/albums/k...Picture054.jpg
use the click adjustment size to alter the data that represents clicks that are on your scope