Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Specialty Handgun Hunting

Specialty Handgun Hunting Techniques For Specialty Handgun Hunting


Reply

Video: Striker in 338 Edge

 
LinkBack Thread Tools Display Modes
  #1  
Old 11-13-2009, 08:43 PM
Silver Member
 
Join Date: Oct 2008
Location: Kodiak, Ak
Posts: 357
Video: Striker in 338 Edge

YouTube - 338 Edge velocity testing

Range day November 13th, 2009

Ran-now snow-35 degress slight breeze in the face

338 Edge
19" 3 groove benchmark barrel
Muscle brake (small) Generation ll -NO TOP PORTS by centershotrifles.com

First I would like to correct myself from a previous post. Did not use my Prochrony first. Used the Pact chrony. Today I used the Prochrony and found the velocities roughly 35fps slower on the Prochrony than the Pact!

Load 1 Nosler 200 Grain Accubond bullet Average velocity 3004 Spread 10fps .250 3 shot group

Load 2. Nosler 225 Grain Accubond bullet Average velocity 2922 Spread 8fps .2

Load 3. GS 180 Gr Borerider/Moly Average velocity 3092 To Much spread .5

Overview: Holy Power Batman:

Heaven is the only place that is better than how I felt today with my wife taping and me pulling the trigger on this incredible HAMMER! No pressure of any kind with 97 grains of H4831 driving that 225 grain Accubond.
Personal feelings: I still haven't got over my reservations of pulling the trigger on this 8 pound finished gun. The trigger breaks clean at 3 pounds and until I change the angle on the sear it will stay where its at. Nearly a ton of energy at 500 yards!!!!

Jim has gone elk hunting again so I won't say until I speak with him about the NO- conventional top porting. I will say that in the micro second between ignition and the gas hits the ports the gun moves one inch to the rear.

I can not hardly sit here and type is how I feel.

Neal
Reply With Quote
  #2  
Old 11-15-2009, 07:07 PM
Bronze Member
 
Join Date: Jan 2007
Location: Southeast Missouri
Posts: 44
Re: Video: Striker in 338 Edge

WAAAAAAAAAYYYY COOOOOLLLL!!!!! I love that Edge Striker. I gotta have one. I want to hear more details.
__________________
Government exists to protect us from each other. Where government has gone beyond its limits is in deciding to protect us from ourselves.
Ronald Reagan
Reply With Quote
  #3  
Old 12-05-2009, 06:55 PM
Platinum Member
 
Join Date: Aug 2005
Location: Murray, Ky.
Posts: 1,270
Re: Video: Striker in 338 Edge

Hello sir I'm not trying to be nosey here but I'm really interested in getting into the sport, about how much would it cost to build something like your edge striker but in a 300ultra.

Thanks
Nathan
Reply With Quote
  #4  
Old 12-05-2009, 08:28 PM
Platinum Member
 
Join Date: Feb 2009
Posts: 3,538
Re: Video: Striker in 338 Edge

That's a Pistol with a big P. Great video and narrative. Thanks for sharing. Looks like the 180's tend to push straight back but those 225's really send that muzzle up. Good luck with those and enjoy.
Reply With Quote
  #5  
Old 12-05-2009, 09:00 PM
Silver Member
 
Join Date: Oct 2008
Location: Kodiak, Ak
Posts: 357
Re: Video: Striker in 338 Edge

Dodd

I am currently working on a 300 Ultra build. As far as the Striker is concerned one simply needs to have or switch boltheads and buy a barrel already chambered for the chambering of your choice. Because of the size of the case
I just drop the round in on top of the follower. It ejects the spent case without pulling the bolt without issue.
Cost depends on what you wish to pay and how long you are willing to wait.
I would strongly encourage you to put on a class muzzle brake however. Barrels cost different prices and muzzle brakes and installation are different costs depending on who you use.
I have $300. in the old Striker and $550. in the barrel and brake. Paint was extra.

The attached video is of a 6.7 pound Striker. I have another 338 Win Mag barrel that I am going to rechamber in the Edge for a 6.7 pound Edge.

YouTube - Ultralight 338 Win Mag (Hammertime)

Chas

Being a center grip there is very little weight forward of the trigger guard. The Edge build came in at exactly 8 pounds. The 180 grains generated much less back thrust compared to the 225 grain bullets. SHortly I will be shooting a rear grip Striker in the Edge and one can see the difference of having all eight pounds forward of the grip as compared to 3-3.5 pounds forward of the grip.

For comparison: My .243 Encore pistol with 16 inch barrel shooting 100 grain bullets has more muzzle jump than this Edge does.

Neal
Reply With Quote
  #6  
Old 12-05-2009, 09:45 PM
Platinum Member
 
Join Date: Aug 2005
Location: Murray, Ky.
Posts: 1,270
Re: Video: Striker in 338 Edge

Thanks so much Neal I'm really excited for you and your future 300 ultra build maybe I'll luck up and find one already together and ready to shoot if not I'll probably get Jim See to put one together for me.


Thanks again for your help,
Nathan
Reply With Quote
  #7  
Old 12-06-2009, 12:01 PM
Platinum Member
 
Join Date: Dec 2008
Location: Great Falls, MT
Posts: 4,520
Re: Video: Striker in 338 Edge

Just awesome, thanks for sharing!

P.S.

Quite the teamwork going on too!
__________________

I voted for my "FREEDOM", "GUNS", and "MONEY" - keep the change - UNK.



"I am always proud of my country!"

"Leadership Rule #2: Don't be an @zzhole." - Maj Gen Burton Field.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Video: Striker in 338 Edge
Thread Thread Starter Forum Replies Last Post
Video of 1934 yard shot with 338 EDGE BMcKell Long Range Hunting & Shooting 14 11-28-2010 07:43 PM
DE 338 Edge- KILL SHOT ON VIDEO. Down Under Hunter Long Range Hunting & Shooting 15 11-24-2009 09:37 PM
338 Edge on a Factory Striker hammertyme Rifles, Bullets, Barrels and Ballistics 8 11-17-2009 09:01 PM
DUH 338 EDGE VIDEO- Fallow 928 +880 yards Down Under Hunter Long Range Hunting & Shooting 9 12-20-2008 04:53 AM
New Video clips Defensive Edge Shawn Carlock Long Range Hunting & Shooting 11 03-20-2008 01:47 PM

Current Poll
Do You Think Slingshots Should Be Legalized For Hunting Brown Bear?
Yes - 47.26%
913 Votes
No - 52.74%
1,019 Vote
Total Votes: 1,932
You may not vote on this poll.

All times are GMT -5. The time now is 03:01 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC