Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

When to turn and measure runout

LinkBack Thread Tools Display Modes
  #8  
Unread 06-04-2009, 07:25 AM
Platinum Member
 
Join Date: Feb 2008
Location: IOWA
Posts: 2,123
Re: When to turn and measure runout

woods,
Interesting pic on the off center of neck versus center of case. Can I assume that after neck turning an off center case, that fireforming will bring the center back to the center of the case ?
Reply With Quote

  #9  
Unread 06-04-2009, 07:39 AM
Platinum Member
 
Join Date: Feb 2008
Location: Wampum, PA
Posts: 1,530
Re: When to turn and measure runout

Quote:
Originally Posted by trueblue View Post
Can I assume that after neck turning an off center case, that fireforming will bring the center back to the center of the case ?

I would.
__________________
"I may be dumb, but I'm not stupid." - Terry Bradshaw
Reply With Quote
  #10  
Unread 06-04-2009, 08:01 AM
Gold Member
 
Join Date: Jun 2006
Location: Shangri-La
Posts: 959
Re: When to turn and measure runout

Here is that other thread

To turn or not (necks)

It is an old thread that got bumped up on page 3 and that is where it got real interesting.
__________________
If you can read this, thank a teacher.......if you are reading this in English, thank a soldier.
Reply With Quote
  #11  
Unread 06-04-2009, 06:12 PM
Platinum Member
 
Join Date: Jun 2001
Location: Potomac River
Posts: 5,073
Re: When to turn and measure runout

Bullet runout is related to neck runoff by simple geometry. If you cure neck runout you will have cured bullet runout. Think about is as a measurement of an angle instead of a measurement of thousands of an inch. The angle of the neck and the bullet will be the same. Cure the off angle problem.
__________________
The Smokin Fur Rifle Club
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: When to turn and measure runout
Thread Thread Starter Forum Replies Last Post
Even Lower Prices: Reloading Dies, Quick Measure Powder Measure afp1 Reloading Equipment and Components 13 01-16-2012 03:42 PM
Can you turn a 22-250 into win 308? 700man Rifles, Bullets, Barrels & Ballistics 2 10-20-2009 08:50 PM
When to turn heikki02003 Reloading 19 02-15-2009 12:39 AM
Quick Measure Powder Measure Swift One Reloading 3 01-19-2007 10:23 AM
How much to turn necks? Alan Griffith Reloading 21 06-29-2006 07:54 PM


All times are GMT -5. The time now is 04:25 AM.


All content ©2010-2015 Long Range Hunting, LLC