What is your favorite 300 Win Mag load?

[gonehuntingagain]

Win brass, Fed 215, 200 gr accubond with 68.8gr of IMR 4350, velocity is 2850. Had to back off from 69 gr as brass life was getting short - velocity was 2950.

I also was shooting 165gr Ballistic tips at 3250 with 74gr of IMR 4350 (max load)

Everything is seated to mag length.

[keithcandler]

Win brass, fed 215, 74-75g of R#22 with 180g Sierra Spt BT.
OUt of my sendero, it shoots 1/2" groups if I use the muzzle break.

180 gr BT or Accubond,73.5gr IMR 7828, WIN brass & fed 215M primers.Under MOA and 2925FPS.

[POP]

180 Accubond/Partition with 75 gr of RL 22 or H4831 [img]/ubbthreads/images/graemlins/grin.gif[/img]

[sniper2]

72.5 gr IMR4350 with 180gr bullet(start lower and work up)

[Jim Hundley]

Hunting load:168gr.Barnes TSX,seated .030" OL,82.5grs.H-1000,Fed.GM215M primer,Lapua brass.Velocity averages 3200fps,1/2" or less @ 100yds.This is out of a 25.3" Hart barrel.Also,75.5grs. RL-22 with Partitions or Accubonds is a very good load in my experience.
Jimmy

[fenceline]

240 smk, win brass done to percision and weighed, 66.6 gr of H4831sc ragged hole 100 so far 3" at 700 yds target, gong and hunting load !!!! Has a very nice impact.