  | Twist rate help |

09-27-2012, 02:17 AM
|
|
Junior Member
|
|
Join Date: Sep 2012
Posts: 18
|
|
|
Twist rate help
Ok so I have been posting asking about bullets and so far out of my 30-378 I can't get anything to shoot much less than 1.5 in now so far I have only tried Berger 210 VLD and the nosler parTitions and next was Thinking about trying the Berger hybrids but not sure what grain to shoot out of my 28in 1in10 barrel ???
|

09-27-2012, 02:53 AM
|
|
Platinum Member
|
|
Join Date: Jan 2011
Location: Spokane, WA
Posts: 1,332
|
|
|
Re: Twist rate help
Berger says 1-10 twist will stabilize even the 230 grain bullet. With the case capacity of the 30-378 that's where I'd start.
|

09-27-2012, 06:28 AM
|
|
Platinum Member
|
|
Join Date: Jan 2011
Posts: 1,797
|
|
|
Re: Twist rate help
Its your seating depth, with a typical h20 capacity of just under 124grns from a fired neck sized case 100-104grns of retumbo has the ability to push 210 bergers fast enough in a 10 twist to shred the jacket. I would try the 200grn accubond, most weatherbys will shoot them pretty good and you should be able to get 3300fps, use Retumbo and fed215m primers and work your way up slowly from about 98-99grns.
|
  |
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Similar Threads for: Twist rate help
|
| Thread |
Thread Starter |
Forum |
Replies |
Last Post |
|
204 twist rate
|
johnnyappleseed |
Rifles, Bullets, Barrels and Ballistics |
2 |
05-02-2010 08:45 AM |
|
22-250 twist rate
|
RBrowning |
Rifles, Bullets, Barrels and Ballistics |
11 |
02-26-2010 09:39 PM |
|
Twist rate?
|
cmfic1 |
Rifles, Bullets, Barrels and Ballistics |
1 |
01-14-2007 05:09 PM |
|
243. rate of twist
|
targetbuster |
Rifles, Bullets, Barrels and Ballistics |
2 |
01-30-2005 03:15 PM |
|
22-250 twist rate
|
NotEnoughTriggerTime |
Rifles, Bullets, Barrels and Ballistics |
3 |
03-28-2004 09:37 PM |
|
|
All times are GMT -5. The time now is 06:59 AM.