Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Turret Press

LinkBack Thread Tools Display Modes
Unread 06-26-2005, 06:30 PM
dcb dcb is offline
Bronze Member
Join Date: Jun 2004
Location: Ohio
Posts: 47
Re: Turret Press

no, the feed is a constant feed. the pin is to stop the flow so the tray can be removed.
believe it or not, I have a degree in electronics and computer science, I work as a electronic mechanical troubleshooter for a plastics operation. worked as a tool and die maker quite a few years ago and do all my machining manually. shop just got there first cnc lathe and a cnc mill all quick change tools. no one can run it yet. the machinest is intimidated by the electronics
the muzzle brake is aluminum and home made.
I make most all my jigs and fixtures for gun repair and I build a few rifles now and then.
Reply With Quote

Unread 06-26-2005, 09:14 PM
Posts: n/a
Re: Turret Press

I was going to say aluminum but erased it. I made one out of al before works fine, gets a bit corroded after a while, pitting and all.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Turret Press
Thread Thread Starter Forum Replies Last Post
WTS-T - Lee Classic Turret Press Kit Ratbelly Reloading Equipment and Components 0 02-03-2011 03:20 PM
T-7 Turret reloading press Elmer Fudd Reloading 16 08-07-2010 12:15 PM
rcbs turret press owen_n_wa Reloading Equipment and Components 0 03-23-2010 05:07 AM
Turret press wfjames Reloading Equipment and Components 4 09-18-2009 12:11 PM
T-7 turret Press? mikemarg Equipment Discussions 0 02-17-2003 01:51 PM

All times are GMT -5. The time now is 07:35 AM.

All content ©2010-2015 Long Range Hunting, LLC