Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

Trouble finding the lands on Savage 338L

 
LinkBack Thread Tools Display Modes
  #1  
Old 07-30-2013, 02:43 PM
Bronze Member
 
Join Date: Jul 2013
Location: North Carolina
Posts: 53
Trouble finding the lands on Savage 338L

Help!! I've been working on a load for my savage 110 FCP and am at my wits end trying to find the darn lands as a starting point for my seating depth. I have split the neck on an empity case and inserted a bullet into the neck (Barnes 280gn LRX). Leaving the bullet seated long, I chamber the round and close the bolt....well low and behold when I remove the dummy round I find that the bullet is still protruding out well past the first driving band on the LRX. Even after rotating the dummy round and rechambering it several times it is still way long.

After scratching my head for a while I decided to try a different approach. I pushed the bullet well down into the case, slid it into the chamber, and useing a small brazing rod inserted thru the primer pocked pushed the bullet forward until it stoped with reasonable force(red neck OAL guage). Well after removing the round this time I find that it is even longer!!

What am I doing wrong? I'm stumped.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 02:31 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC