close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

STW/TSX load

LinkBack Thread Tools Display Modes
  #1  
Unread 10-13-2007, 03:30 PM
Silver Member
 
Join Date: Nov 2004
Location: Michigan
Posts: 218
STW/TSX load

Just took posession of an unfired Sendero 7STW (still in the box). I have found numerous Accubond loads but would appreciate any loads for the 140gn TSX. I have pounds of RL22, H1000 and 7828 from my WBY STW that I couldn't get to group.

Thanks in advance, Wade
__________________
QDMA Member
7STW Club
Reply With Quote
  •   #2  
    Unread 10-13-2007, 10:14 PM
    Gold Member
     
    Join Date: Jul 2005
    Location: Arkansas / Oklahoma / Boarder
    Posts: 690
    Wade



    That sould like you found an good one .

    If you would like to sale it just let me know .


    I will try to buy your the Rifle .


    Redbone
    __________________
    7 MM STW

    Kill more Coyotes

    Feed The Buzzards
    Reply With Quote

      #3  
    Unread 10-14-2007, 06:54 AM
    Silver Member
     
    Join Date: Nov 2004
    Location: Michigan
    Posts: 218
    Was listed in the classifieds here for a minute. I jumped all over it. I had it for a full hour before I posted a request for loads. I'll take this one to the grave. But if anyone has some good 140gn TSX load, I'd appreciate. I know the 160's rule but I had a box laying around.
    __________________
    QDMA Member
    7STW Club
    Reply With Quote
      #4  
    Unread 10-14-2007, 11:47 PM
    Silver Member
     
    Join Date: May 2006
    Posts: 288
    72.5 up to 75 gr of H4831 all held right about 3/4 inch i set it at .05 off the lands. Havent had time to try anything else. I think the 75 were moving at 3350
    __________________
    Member of the 7 MM STW Club
    Reply With Quote
      #5  
    Unread 10-16-2007, 09:45 AM
    Gold Member
     
    Join Date: Dec 2006
    Location: FREE RUN, MS
    Posts: 774
    STX 140GR TSX BT, MRX BT, AND BANDED SPITZER


    MIN fps MAX fps load density

    RL22 77.5 3208 82 3405 95%

    H1000 81 3121 86 3306 100%.....shows most accurate

    IMR 7828SSC 78 3161 82 3360 92%



    From Barnes Copper Club load data what will be printed in Vol 4
    __________________
    MEMBER "AM STRIKEFORCE"

    Last edited by NYLES; 10-16-2007 at 09:50 AM.
    Reply With Quote
      #6  
    Unread 11-07-2007, 11:47 AM
    Bronze Member
     
    Join Date: Dec 2006
    Posts: 45
    I have worked up to 86 gr Retumbo behind 140 tsx's without getting into crazy pressures. Retumbo continues to be my go to powder for every bullet I have tried in my STW.
    Reply With Quote
      #7  
    Unread 11-07-2007, 04:37 PM
    Silver Member
     
    Join Date: Aug 2007
    Location: Oklahoma
    Posts: 170
    dont mean to hijack the thread, but...... to what length are you guys loading your 140 grainers?
    __________________
    Member - 7STW Club
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: STW/TSX load
    Thread Thread Starter Forum Replies Last Post
    Kirby Allen’s “no load development” load development method. WildcatB Reloading 70 09-24-2012 06:01 PM
    260 Load Help.. Quick Load??? novaman64 Reloading 6 09-02-2012 11:48 AM
    Load data .243 Ackley varmit load please ballie Reloading 5 02-22-2011 01:49 PM
    338 RUM Load Capt Academy Reloading 0 10-04-2008 08:06 AM
    load for 300 win mag popwarlick Reloading 1 03-23-2008 04:21 AM


    All times are GMT -5. The time now is 06:21 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC