Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


stuck brass

LinkBack Thread Tools Display Modes
Unread 04-29-2012, 08:20 PM
Silver Member
Join Date: Feb 2012
Location: West
Posts: 123
Re: stuck brass

Originally Posted by Jinx View Post
The best way I have found to remove stuck case. It works very good and is not very expensive:

GS CUSTOM BULLETS - Stuck case removal
Stuck case removal kit...made just like the commercial ones. Should work fine.
Reply With Quote
  •   #9  
    Unread 04-29-2012, 09:05 PM
    Bronze Member
    Join Date: Nov 2011
    Location: West Central, UT
    Posts: 64
    Re: stuck brass

    Parts I used. 1/4"x20 bolt long enough to screw into case through pipe nipple, flat washers, 1/4" tap, #7 drill bit(.2010"), and a 2 1/2" long pipe nipple just big enough to fit over case head.
    Back out primer punch. Drill and tap hole. Place pipe nipple over case head and screw bolt with flat washers in. Place die in vise and tighten bolt until case pops out.
    Reply With Quote



    Thread Tools
    Display Modes

    Similar Threads for: stuck brass
    Thread Thread Starter Forum Replies Last Post
    My Brass is STUCK! /338 Edge Dies HighCountryCo Reloading 11 08-02-2011 12:43 PM
    Im stuck! HELP! ishootkittens Long Range Hunting & Shooting 16 12-22-2010 11:39 PM
    Problem Reloading, Brass gets stuck near belt jazzato Reloading 28 09-13-2010 09:38 PM
    300 Brass Stuck JP Hunter Reloading 4 09-09-2010 08:47 AM
    Getting stuck bullets really STUCK! Alan Griffith Reloading 6 01-30-2007 07:52 PM

    All times are GMT -5. The time now is 03:41 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC