Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Setting up chamber, how far out to seat? pics

LinkBack Thread Tools Display Modes
Unread 07-24-2008, 01:04 PM
Silver Member
Join Date: Sep 2005
Location: Kalifornicated
Posts: 390
Setting up chamber, how far out to seat? pics

I am sending my rifle to get re-reamed, these are the two bullets I would like to try first, 210 Berger and 240 Sierra (.30-.378 Weatherby). I put together two rounds for the gunsmith to set the chamber up around. This is a single shot action so overall length is not a concern.

How does this look, I "think" I should have the base of the boat tail at around the juntion of the neck ?

Any thoughts?


USMC Scout Sniper 88-94
Instructor 1st. Mar. Div. SS school 91-94
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Setting up chamber, how far out to seat? pics
Thread Thread Starter Forum Replies Last Post
Bullet seat depth Gone Ballistic Reloading 5 04-19-2011 03:27 PM
How far do I seat off the lands? orangeride Reloading 1 01-28-2011 06:02 PM
Can I re cut a 260rem chamber to AI specs without setting my barrel back? ICANHITHIMMAN Gunsmithing 7 03-20-2010 10:42 AM
Where do you seat your 300 SMK's Broz Reloading 3 04-19-2009 08:29 AM
seat depth Nighthawk Rifles, Bullets, Barrels & Ballistics 7 01-29-2004 02:47 PM

All times are GMT -5. The time now is 03:58 PM.

All content ©2010-2015 Long Range Hunting, LLC