Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

RESSURECTING the .270 Wea Mag cases from 7mm RM...

 
LinkBack Thread Tools Display Modes
  #1  
Old 02-23-2006, 04:19 AM
Junior Member
 
Join Date: Jan 2006
Posts: 13
RESSURECTING the .270 Wea Mag cases from 7mm RM...

Having resized from 7mm to .270 Wea Mag-and probably looking at too many sources of info-my question is is there a noticable accuracy difference during the fireforming vs already formed cases?I have loaded a few w/67grn H4831/130's,72grn same w/90 grn HP's- definately on the low side, and 60grns H4350/150's.Also, I've seen some info that using this method, vs, a fast powder w/packed granular medium(cornmeal, etc) with no bullet, will result in short cases? The necks are just a wee bit shorter than Weatherby after a few runs through the dies-but well over caliber dia. in length-it seems that they would try to flow forward a bit using the bullet ???? Any suggestions/advice/experience in this would be welcomed.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: RESSURECTING the .270 Wea Mag cases from 7mm RM...
Thread Thread Starter Forum Replies Last Post
FS 325 WSM cases Ghostman Reloading Equipment and Components 0 11-15-2009 08:15 PM
New cases verses Fire formed cases Topshot Reloading 4 11-02-2009 08:46 AM
Gun cases ???? stifle Long Range Hunting & Shooting 1 02-17-2008 04:05 PM
Gun cases bailey1474 General Discussion 10 07-22-2005 10:41 PM
Making 300 RUM cases out of Norma 404 Jeffery cases? Kanab Reloading 11 03-31-2005 10:32 AM


All times are GMT -5. The time now is 08:19 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC