close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

Remminton Brass is $!@$

LinkBack Thread Tools Display Modes
  #8  
Unread 03-05-2009, 03:25 PM
Silver Member
 
Join Date: Dec 2008
Location: Somewhere in Kansas
Posts: 247
Re: Remminton Brass is $!@$

Well I'll just have to see what the other 50 look like.
Reply With Quote
  •   #9  
    Unread 03-05-2009, 07:23 PM
    Official LRH Sponsor
     
    Join Date: Jun 2004
    Location: Fort Shaw, Montana
    Posts: 6,847
    Re: Remminton Brass is $!@$

    Its not uncommon to see dents in any bulk shipped brass. It is also not uncommon to see neck flaws in any brand of brass. In your case, you are seeing a higher number then average which I suspect is just bad luck. I suspect your next 50 brass will be better.
    __________________
    Kirby Allen(50)

    Allen Precision Shooting
    Home of the Allen Magnum, Allen Xpress and Allen Tactical Wildcats and the Painkiller Muzzle brakes.

    Farther, Faster and Flatter then ever before.

    Web Page: www.apsrifles.com

    allenmagnum@gmail.com
    Reply With Quote

      #10  
    Unread 03-05-2009, 07:48 PM
    Silver Member
     
    Join Date: Dec 2008
    Location: Somewhere in Kansas
    Posts: 247
    Re: Remminton Brass is $!@$

    Quote:
    Originally Posted by Fiftydriver View Post
    Its not uncommon to see dents in any bulk shipped brass. It is also not uncommon to see neck flaws in any brand of brass. In your case, you are seeing a higher number then average which I suspect is just bad luck. I suspect your next 50 brass will be better.
    I shure hope so
    Reply With Quote
      #11  
    Unread 03-05-2009, 09:03 PM
    Platinum Member
     
    Join Date: Mar 2007
    Location: MN
    Posts: 1,219
    Re: Remminton Brass is $!@$

    IMO small dents is not a reason to throw them away (it is a reason to be mad though!). I have had several wsm cases that I used way too much lube on and got quite a bit of denting on the shoulder. Loaded them up with a light load and fired them. after a couple loadings you can't tell the difference from the rest.
    __________________
    I used to re-load but now I "hand-load".
    -- Well, at least I try --
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Remminton Brass is $!@$
    Thread Thread Starter Forum Replies Last Post
    338 Lapua Brass compared to 300 Remington Ultra Brass DANTEC Rifles, Bullets, Barrels & Ballistics 6 02-29-2012 11:43 PM
    Group differences in Weatherby Brass versus new Norma Brass TX mountain hunter Long Range Hunting & Shooting 5 12-29-2010 10:17 PM
    25-06 reloading dies, brass, and bullets / 45ACP brass jeffro Reloading Equipment and Components 1 05-01-2010 10:51 AM
    338 Edge, Brass life test. Rem 300RUM brass AJ Peacock Reloading 15 12-30-2009 12:26 PM
    Nosler Brass cosmetic seconds good brass? sambo3006 Reloading 6 01-04-2007 08:57 PM


    All times are GMT -5. The time now is 03:08 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC