Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


remington 338 LMR loafds data

LinkBack Thread Tools Display Modes
Old 06-09-2013, 09:31 AM
Silver Member
Join Date: Sep 2002
Posts: 285
remington 338 LMR loafds data

Just looking to see if anyone has any 250 and 300grn loads they want to share. I sold my 98bravo a while back and tried the load i shot in it in the Remington but it didnt care for it at all. I was thinking h1000 with 300mks but just thought i would check here as i know there are a few guys on here that shoot them.

Reply With Quote
Old 06-12-2013, 01:31 PM
Gold Member
Join Date: Aug 2011
Location: Lynchburg, TN
Posts: 717
Re: remington 338 LMR loafds data

First off, let me say that this is a MAX load in my Remington 700P 338 Lapua. Drop back at least 5 grains and work up.

Sierra 300 gr. SMK
91.5 gr. H1000
Fed. 215M Primers
3.710" COAL
Lapua Brass

If any of your components are different than these, drop back a couple more grains and work up. The 3.710" COAL is a .010" Jam into the lands so you might want to measure to your lands and back off .040" to start.

This is the most accurate load in my rifle, but as you know, all guns are different.

Good Luck
Reply With Quote


Thread Tools
Display Modes

Current Poll
How Many Different Cartridges Do You Reload For?
ZERO, all factory ammo - 8.06%
360 Votes
1 - 2.77%
124 Votes
2 or 3 - 14.59%
652 Votes
4 or 5 - 20.41%
912 Votes
6 or 7 - 14.86%
664 Votes
8 or 9 - 8.64%
386 Votes
10 or more - 30.68%
1,371 Vote
Total Votes: 4,469
You may not vote on this poll.

All times are GMT -5. The time now is 02:07 PM.

Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC