Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Reloading question dented brass?

LinkBack Thread Tools Display Modes
Unread 12-17-2006, 01:39 PM
Bronze Member
Join Date: Nov 2005
Location: Mississippi
Posts: 33
Re: Reloading question dented brass?

Make sure not to get ANY lube on the necks or they will dent, use just enough for a smooth resize, I just give mine a light roll over my pad, making sure none gets on the necks, that's all.
Reply With Quote

Unread 12-20-2006, 07:14 AM
Silver Member
Join Date: Nov 2005
Location: Texas
Posts: 226
Re: Reloading question dented brass?

I agree with most of the reply's. Clean the dies and chek that the vent is clear and I particuliarly agree with meichele, There is nothing better than imperial sizing wax 1 little can goes a very long way. I size two and skip lubing the thrid and start this sequence over on everything except when forming a new case to some other than it is.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Reloading question dented brass?
Thread Thread Starter Forum Replies Last Post
Can I load and fire dented cases? proload Reloading 4 07-22-2012 01:03 PM
Ar-10 Reloading Question snipes Long Range Hunting & Shooting 8 08-01-2011 06:35 AM
25-06 reloading dies, brass, and bullets / 45ACP brass jeffro Reloading Equipment and Components 1 05-01-2010 10:51 AM
OOPS, Case mouths all dented. What to do? bwaites Reloading 2 03-31-2009 12:20 PM
reloading question william101 Reloading 24 11-14-2005 11:48 AM

All times are GMT -5. The time now is 01:55 AM.

All content ©2010-2015 Long Range Hunting, LLC