extremely rare for me! I have done a couple hundred rounds of stuff for my brother inlaw (basic 30-06 stuff) when he couldn't get his dies setup right (they were bad right out of the box). Now he's entering into the .338-06 adventure, and has never setup a case for fire forming; plus he's somewhat reluctant about it. I told him to get his hands on some new 30-06 brass and we'd build up some rounds to fire form. Then we'll set his dies up for his press off the fire formed cases. I also have promised to reload a couple hundred 22-250 rounds for a guy I know who promised me access to his 3500 acres he farms. That's about it! I may end up doing another batch of 22-250 for the farmer's brother as he told me he had about 1200 acres he'd let me use. These all will be mid range loads with 50 grain bullets. Nice thing about the 22-250, as the brass all came out of the same chamber, and will also be the same for his brother. The only othertime I can think of doing reloads was for a local cop that was on a shooting team that required the use of 168 grain bullets in a .308. I built him about a hundred rounds off a known accuracey load. (he won). The other guy was on the Army Reserve shooting team, and I did about a hundred rounds for him, and basicly taught him how to build rounds at the house. He also won, and I think this is the only time I've ever done ammo for an M14 rifle. That Marine could shoot the eyes out of a snake at 400 yards, and it's kinda funny that he ended up in the Army Reserves.
If one was licenced to reload or you would do it for someone what would a fair charge be for resizing , cleaning , trimming , priming , loading ; $.25 / load ?
First of all it would depend on cal. some take more powder than others, some a lot more, .223 vs .338 secondly depends on what you feel your time is worth. Unless of course they are providing all supplies, then $.25 would be a fair price IMO.