Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Reloading for the 338 Edge

LinkBack Thread Tools Display Modes
Unread 01-08-2007, 09:45 PM
Silver Member
Join Date: Jan 2005
Posts: 113
Re: Reloading for the 338 Edge

Dave which seating die are you using? Thanks for the info.
Reply With Quote

Unread 01-09-2007, 08:35 PM
Platinum Member
Join Date: Feb 2004
Location: Pennsyltucky
Posts: 2,630
Re: Reloading for the 338 Edge

350, i got a Wilson blank in 338 and sent it to Chris Matthews who did my metal work. he ran the chamber reamer in the blank so i have an exact copy of my chamber. loads very straight ammo.

i also have a $15 hornady seater that works very well. if the cases are straight,the bullet will probably seat very straight.
Reply With Quote
Unread 08-06-2010, 11:09 AM
Junior Member
Join Date: Aug 2010
Posts: 3
Re: Reloading for the 338 Edge


So I could really use some help since you guys are on it!! I currently have Redding 300 fl sizing die that my gunsmith opened up the neck and then I ordered a .364 bushing for after I measured a few of my loaded necks. I have shot it and it shoots pretty decent considering I havent worked on a load yet. BUT based off of what I have read here the 300 ultra die was not the one that I should have had modified right???

Also I am using a 338 ultra redding seating die and I have to have it cranked way down to reach my correct seating depth. Is that normal?

Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Reloading for the 338 Edge
Thread Thread Starter Forum Replies Last Post
Defensive Edge - LRH Reloading DVD Shawn Carlock Long Range Hunting & Shooting 60 01-05-2015 11:28 PM
WTB 338 Edge reloading items buckbrush Reloading Equipment and Components 0 07-01-2010 05:26 PM
Which reloading dies for the .338 Edge? fmajor Reloading 8 11-25-2009 12:03 PM
Reloading the 338 Edge hbnac Reloading 4 03-22-2009 09:11 AM
338 Edge reloading problem CHARLIEDUECE65 Gunsmithing 9 01-27-2009 06:34 PM

All times are GMT -5. The time now is 06:39 PM.

Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC