Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


redding presses

LinkBack Thread Tools Display Modes
Unread 12-30-2007, 03:02 PM
Bronze Member
Join Date: Dec 2007
Location: PA
Posts: 88
redding presses

Will the redding boss press fit the 300RUM and 300 wby mag or does just the redding ultramag press fit those cal.

Reply With Quote
  •   #2  
    Unread 12-30-2007, 04:33 PM
    Gold Member
    Join Date: Dec 2004
    Location: Black Hills,South Dakota
    Posts: 669
    It should handle them,but you might like the Big Boss for those larger cases.
    The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms -Samuel Adams
    Reply With Quote

    Unread 12-30-2007, 08:17 PM
    Silver Member
    Join Date: Mar 2007
    Posts: 430
    The Redding Boss is a small-frame press having approximately a 4" frame opening and 3 1/2" ram stroke.

    The Big Boss has a 4 1/2" frame opening and 3 13/16" ram stroke.

    The Ultramag has a 4 3/4" frame opening and 4 1/8" ram stroke.

    The T-7 Turret press has a 4 3/4" frame opening and 3 13/16" ram stroke.

    The Big Boss is designed to handle the large magnum calibers. This is an excellent general-purpose press, and, if you choose it for your own, I believe you will be well pleased with its service. The T-7 Turret has similar capacity with the added convenience of keeping your dies permanently mounted. Similarly, the Hornady L-N-L bushings can be used with the Big Boss and Ultramag.

    Last edited by Winchester 69; 12-30-2007 at 08:26 PM.
    Reply With Quote


    Thread Tools
    Display Modes

    Similar Threads for: redding presses
    Thread Thread Starter Forum Replies Last Post
    Three progressive presses Ian M Rifles, Bullets, Barrels & Ballistics 6 07-19-2012 07:27 PM
    Forester presses?? ltrbuck Reloading 19 09-07-2010 11:27 AM
    2 Rcbs Jr 2 Presses camoman80 Reloading Equipment and Components 7 09-21-2009 03:57 PM
    Any recommendations on presses? dsgarmon Reloading 4 08-10-2005 06:33 AM
    reloading presses??? tfrag06 Reloading 4 07-17-2005 08:12 PM

    All times are GMT -5. The time now is 08:17 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC