Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Redding Comp. Shell Holder Kit ??????

LinkBack Thread Tools Display Modes
Unread 02-04-2011, 03:37 PM
Gold Member
Join Date: Mar 2008
Location: clearfield county , Pa
Posts: 809
Re: Redding Comp. Shell Holder Kit ??????

Originally Posted by Broz View Post
Jim, your way is probably a better method. I don't have the correct mic set up to measure it to .001" But as far as "the feel" I can't feel it either until I remove the firing pin assembly from the bolt. Taking away the cocking tension upon closing the bolt makes this pretty easy to feel. If the shoulder is dragging I sure can feel it.


Jeff , I didn't think of the cocking when you said you took out the firing pin assy , this makes better sense to me now . I know I could close the bolt just as easy using the .008 as I could using the .000 . I could tell a little resistance when I used the .010 . thanks for explaining ! Jim
Reply With Quote
  • Reply


    Thread Tools
    Display Modes

    Similar Threads for: Redding Comp. Shell Holder Kit ??????
    Thread Thread Starter Forum Replies Last Post
    338 lapua shell holder? MTDOGGER Reloading 6 03-14-2011 08:54 PM
    What shell holder for 338/378 Gnome! Reloading 2 09-30-2010 06:25 PM
    Redding #35 Comp Shell Holder Set SES50 Reloading Equipment and Components 1 07-24-2008 05:05 PM
    Shell holder ? RockyMtnMT Reloading 6 07-20-2008 04:25 AM
    shell holder for 408 Cheyenne ? DANTEC Rifles, Bullets, Barrels & Ballistics 0 03-11-2003 02:27 PM

    All times are GMT -5. The time now is 01:25 AM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC