Quote:
Originally Posted by bedlam
I don't suppose you have a recommendation for what you are using. I see several out there, but I've never used this other style, so I'm unsure on what would work over the others.
|
I do have a recommendation. Get a collet die with 7/8-14 threads that's normally used in presses. Drill a 7/8ths inch hole in a 3/4ths inch thick board then put the bullet puller in it with lock rings on both sides of the board. Use a collet sized for your bullets. I've used one made by RCBS that works fine. Other makes are just as good.
Linear Mode
