Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

pulling bullets

 
LinkBack Thread Tools Display Modes
  #8  
Old 07-09-2012, 08:40 PM
Platinum Member
 
Join Date: May 2012
Location: N.D.
Posts: 3,025
Re: pulling bullets

remember to get collets in all diameters that you'll need. I've tried to use 'em for a close diameter-- say a 30 for a 7mm, and it will close up the gaps and they are a bugger to open again. I do use a 7mm for my 270 and a 338 for the 375 h@h , but the 338 has been opened up and the 270 and 7mm are so close in diameter it soesn't matter to a collet
Reply With Quote

Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: pulling bullets
Thread Thread Starter Forum Replies Last Post
Question: case prep after pulling bullets??? hoytaddict Reloading 16 01-25-2012 11:34 AM
Pulling bullets with wire cutters vs accuracy Iron Worker Reloading 22 12-20-2011 08:48 AM
Pulling Bullets? jsthntn247 Reloading 6 06-01-2011 09:48 PM
Quick question on pulling bullets datsjeep Reloading 34 06-26-2010 08:33 AM
Reloading? - Bullets pulling out MN Hunter General Discussion 1 06-25-2010 01:47 PM


All times are GMT -5. The time now is 10:59 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC