Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


proper amount of neck tension

LinkBack Thread Tools Display Modes
Unread 09-05-2013, 01:23 AM
Platinum Member
Join Date: Apr 2012
Location: California Central Coast
Posts: 2,397
Re: proper amount of neck tension

How old are you?
Originally Posted by Mikecr View Post
You've challenged my communications several times now(several threads), and with little more than generalizations, errors, and insults.
But we're getting along just fine. I am glad you understand neck tension.
Fred Seaman
“Ask, Listen, Learn, Grow”
"Quit worrying about the little things, good luck and god speed"
Reply With Quote

Unread 09-05-2013, 06:40 PM
Junior Member
Join Date: Dec 2012
Posts: 4
Re: proper amount of neck tension

The mandrel on a Lee neck sizing collet die is .3055", this is the smallest diameter the neck is compressed down to and the resized brass normally is around .001" smaller in diameter than the projectiles at .3065- .307".
I have found these dies neck form cosistently to this size and a lot of people report excellent results with these dies.
Reply With Quote


Thread Tools
Display Modes

All times are GMT -5. The time now is 05:38 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC