close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

primed brass

LinkBack Thread Tools Display Modes
  #1  
Unread 06-02-2013, 09:29 AM
Junior Member
 
Join Date: Jul 2012
Posts: 5
primed brass

I have 250 resized primed brass I got in a trade. They have the lube on them.
How can I clean the lube off primed brass? They are too sticky and greasey to load and run in an AR
Reply With Quote
  •   #2  
    Unread 06-02-2013, 01:39 PM
    Platinum Member
     
    Join Date: May 2012
    Posts: 4,138
    Re: primed brass

    Quote:
    Originally Posted by Rascal View Post
    I have 250 resized primed brass I got in a trade. They have the lube on them.
    How can I clean the lube off primed brass? They are too sticky and greasey to load and run in an AR
    solvent like alcohol -- don't use anything that would eat the brass like bore cleaner
    Reply With Quote

      #3  
    Unread 06-02-2013, 09:09 PM
    Platinum Member
     
    Join Date: Dec 2011
    Location: Michigan
    Posts: 1,125
    Re: primed brass

    Depending on the lube used, you may be able to give them a firm wipe with a cotton rag (t-shirt) and get 90%+ off. Worth a try before going to solvent, but if its necessary +1 above, stick to alcohol. And don't soak them
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 07:34 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC