Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Pressure "spikes" on Big Magnum Cartridges....

LinkBack Thread Tools Display Modes
Unread 10-16-2006, 06:10 AM
Silver Member
Join Date: Oct 2004
Location: Atlanta, GA
Posts: 309
Re: Pressure \"spikes\" on Big Magnum Cartridges....

Military applications have typically used an insulating black sealant to eliminate galvanic corrosions between bullet and case which is why old mil ammo should have that seal broken by a touch of deeper seating before use. The liquid sealant turns to a solid with time whereas factory molly does not. Here in the humid South in summer the humnidity is so high that moisture in reloading is a factor. Good stuff on your belted magnum home page. Overbore
Member, Revolutionary War Veterans Association
Reply With Quote

Unread 10-18-2006, 01:19 PM
Bronze Member
Join Date: Feb 2005
Posts: 83
Re: Pressure \"spikes\" on Big Magnum Cartridges....

Have you thought about carbon fouling? (more shots more fouling)
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Pressure "spikes" on Big Magnum Cartridges....
Thread Thread Starter Forum Replies Last Post
Jump to the lands and pressure spikes Mule Reloading 11 12-13-2006 04:09 PM
3 spikes down!!! remingtonman_25_06 Long Range Hunting & Shooting 9 11-13-2006 01:08 PM
Belted Magnum Cartridges Slopeshunter Rifles, Bullets, Barrels & Ballistics 10 11-08-2006 06:08 AM
Seating depth for boat tail bullets in belted magnum cartridges Lee in OH Rifles, Bullets, Barrels & Ballistics 4 04-07-2003 03:59 PM
Short Action Magnum cartridges Marc Rifles, Bullets, Barrels & Ballistics 0 11-30-2001 03:21 AM

All times are GMT -5. The time now is 11:29 AM.

All content ©2010-2015 Long Range Hunting, LLC