close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

pressure help?

LinkBack Thread Tools Display Modes
  #1  
Unread 01-12-2011, 06:13 PM
Junior Member
 
Join Date: Jan 2010
Posts: 6
pressure help?

I am using rem. brass, federal lmr primer, berger210 vld and 92g retumbo. My primers have a ring around them and have had 2 back primers out far enough to lock bolt closed. Dropped firing pin on them once or twice and bolt opened right up. The web of the case was within a thous. fired and unfired. Is this pressure or oversized flashholes in some of the rem. brass?
Reply With Quote
  •   #2  
    Unread 01-12-2011, 06:24 PM
    Official LRH Sponsor
     
    Join Date: Jul 2006
    Location: Harrisburg, PA
    Posts: 2,683
    Re: pressure help?

    Quote:
    Originally Posted by bednhm View Post
    The web of the case was within a thous. fired and unfired.
    What are the exact measurements?

    A few thou makes a big difference when monitoring case stretch as it relates to mag load!
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: pressure help?
    Thread Thread Starter Forum Replies Last Post
    When is too much pressure??? ovastafford Reloading 7 08-15-2010 02:12 PM
    Max Pressure for .30-06 vs. 6.5-06/270/338-06 chuckhammer Reloading 5 07-21-2010 10:09 PM
    Too much pressure? land308 Reloading 9 06-27-2009 07:36 AM
    pressure col48 Reloading 6 05-03-2006 08:52 AM
    408 Pressure dudule Rifles, Bullets, Barrels & Ballistics 0 06-13-2005 11:24 AM


    All times are GMT -5. The time now is 02:52 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC