close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

Powder on the case

LinkBack Thread Tools Display Modes
  #1  
Unread 04-21-2013, 10:02 PM
Silver Member
 
Join Date: Mar 2011
Location: Shippensburg Pa
Posts: 101
Powder on the case

Shooting at the range today had some case covered with powder back to the rim. Primers show no sign of pressure or blow out Any suggestion on that to look at first. Load was the first step on load development for the gun.
Case is a hornady loaded for the 4th time bullet was a 95 gr v-max powder was CFE-223 @ 40.4 Gr out of a 28" barrel. Not all cases had the blow by on them
Reply With Quote
  •   #2  
    Unread 04-22-2013, 12:40 PM
    Platinum Member
     
    Join Date: Dec 2011
    Location: Michigan
    Posts: 1,124
    Re: Powder on the case

    Here is a thread on a similar topic where a member had an issue with virgin brass. I think there was also one where the problem occured after multiple firings. If I can find it I will post it. I think the general consensus was to try annealing as a solution.

    Powder residue entire length of case....help
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 09:28 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC