Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

Outside neck dia. of loaded 25-06?

 
LinkBack Thread Tools Display Modes
  #15  
Old 08-24-2012, 03:53 PM
Platinum Member
 
Join Date: Apr 2010
Location: Allen, TX
Posts: 2,608
Re: Outside neck dia. of loaded 25-06?

You're probably getting inaccurate measurements due to a burred edge or inexpensive calipers or technique.

Try inside/outside chamfering the necks on your virgin brass and make sure you get a good measurement.

There won't be that much difference due to firing.

If your brass lot is that inconsistent, you may have to neck turn.

-- richard
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Outside neck dia. of loaded 25-06?
Thread Thread Starter Forum Replies Last Post
300 Norma loaded neck size with 230 Bergers HoytFlinger Rifles, Bullets, Barrels & Ballistics 1 08-12-2012 06:18 PM
300 rum loaded neck diam??? (nosler and federal) squeaker Reloading 1 06-16-2011 12:29 AM
Fired Cartridge vs. Loaded Cartridge Neck Size? kodiakoutdoors Reloading 8 03-27-2011 10:05 AM
300 RUM reamer .333 (tight neck) neck diameter F/S Michael Eichele Other Stuff For Sale 1 05-28-2009 10:44 PM
243 win loaded neck dimension coupalr Reloading 2 10-06-2006 11:30 AM


All times are GMT -5. The time now is 06:57 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC