Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

Nosler-Norma brass

 
LinkBack Thread Tools Display Modes
  #1  
Old 03-08-2009, 12:36 AM
Silver Member
 
Join Date: Feb 2009
Posts: 175
Nosler-Norma brass

Hello. Lately I've been looking for Nosler 300 Win. Mag. brass. It's hard to find anything, let alone the Nosler brass. I was at a gun show today and couldn't find any again. I did find 100 Norma brass though. Three fellows I spoke to said that Nosler brass is made by Norma and is the same thing. Is there any truth to this? The brass I bought was once fired and I paid $8 per 20 brass. Thanks, Eric
Reply With Quote
  #2  
Old 03-08-2009, 10:27 AM
Platinum Member
 
Join Date: Nov 2006
Location: Dayton, Nevada
Posts: 1,804
Re: Nosler-Norma brass

Quote:
Originally Posted by eric2381 View Post
Hello. Lately I've been looking for Nosler 300 Win. Mag. brass. It's hard to find anything, let alone the Nosler brass. I was at a gun show today and couldn't find any again. I did find 100 Norma brass though. Three fellows I spoke to said that Nosler brass is made by Norma and is the same thing. Is there any truth to this? The brass I bought was once fired and I paid $8 per 20 brass. Thanks, Eric
No, the strongest rumor is that Federal makes the brass for Nosler. There was a forum member here a couple years ago that worked for Nosler at the time. He said that Federal is the supplier.

And, with all the problems with Noslers 300win brass being reported lately. I, myself, would steer clear of Nosler brass.

Keep looking for Norma.
Reply With Quote
  #3  
Old 03-08-2009, 11:26 AM
Platinum Member
 
Join Date: Aug 2005
Location: Murray, Ky.
Posts: 1,281
Re: Nosler-Norma brass

I had bought 50 pieces of nosler brass for my 300 ultra and the brass was some of the best i had ever seen as weight consistency goes they were all very close. My problem with them was if you used a moderate to hot load all i would get is one reload on a case and then the primer pocket would be to lose to even hold a primer in it. NOt trying to knock nosler's brass but for that kind of money i was really hoping to get more reloads out of it. With the same loads in remington brass i was getting at least four reloads out of them.

I dont know if you would have those same problems or not since yours is 300 win mag but i would think the same things would happen. Ive always had good luck with Rem brass you have to do alittle more case prep on them but they seem to last alot longer and as hard as brass is to come by these days the longer they last the better.

Hope this helped
Nathan.
Reply With Quote
  #4  
Old 03-08-2009, 03:01 PM
Platinum Member
 
Join Date: Jan 2004
Location: Blackfoot, Idaho
Posts: 8,178
Re: Nosler-Norma brass

nddodd hit the problem on the head. Its a universal problem.
Reply With Quote
  #5  
Old 03-08-2009, 03:57 PM
B23 B23 is offline
Gold Member
 
Join Date: Oct 2008
Location: Spokane, Wa.
Posts: 960
Re: Nosler-Norma brass

I just got 200 rnds from Nosler Friday in 300 Rum for a .338 Edge project that is getting put together hopefully to be done by fall.

I've been told by others not Nosler that Nosler brass is Norma brass.

Like everyone else that has a hot rod .338 I sure do wish Lapua made 300 RUM brass!!!!
Reply With Quote
  #6  
Old 03-09-2009, 11:54 PM
Platinum Member
 
Join Date: May 2008
Location: South of Canada and North of Wyoming
Posts: 5,953
Re: Nosler-Norma brass

Quote:
Quote:
Originally Posted by eric2381 View Post
Hello. Lately I've been looking for Nosler 300 Win. Mag. brass. It's hard to find anything, let alone the Nosler brass. I was at a gun show today and couldn't find any again. I did find 100 Norma brass though. Three fellows I spoke to said that Nosler brass is made by Norma and is the same thing. Is there any truth to this? The brass I bought was once fired and I paid $8 per 20 brass. Thanks, Eric
Considering Midway is selling Norma 300 WM for $35 per 20 and a Norma case will likely get you 10-20 reloads, I think you got one heck of a deal.
Reply With Quote
  #7  
Old 03-10-2009, 12:04 AM
Silver Member
 
Join Date: Feb 2009
Posts: 175
Re: Nosler-Norma brass

Thanks guys. The fellow that I bought this stuff from has another 100 at home. I might as well buy it as well. I'll need to call and cancel my order for Nosler brass. I'll try out my 7mm brass I have loaded, hopefully it'll last a bit. I just need some warmer weather so I can get out and do some shooting. Eric
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Nosler-Norma brass
Thread Thread Starter Forum Replies Last Post
Group differences in Weatherby Brass versus new Norma Brass TX mountain hunter Long Range Hunting & Shooting 5 12-29-2010 10:17 PM
Norma, Nosler and other custom ammo WeaverShooter The Basics, Starting Out 2 07-30-2010 11:05 PM
Nosler custom brass vs. Norma... santee116 Reloading 6 03-30-2009 09:08 AM
Nosler Brass cosmetic seconds good brass? sambo3006 Reloading 6 01-04-2007 08:57 PM
Moving from Win brass to Norma, Lapua or Nosler Alan Griffith Reloading 6 04-18-2006 09:18 PM


All times are GMT -5. The time now is 06:40 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC