close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

New Brass

LinkBack Thread Tools Display Modes
  #1  
Unread 02-10-2005, 03:54 PM
Silver Member
 
Join Date: Sep 2004
Location: Southwestern Montana
Posts: 294
New Brass

What do you guys do to your new brass? Perform the whole operation or just some steps untill it is fire formed to your particular rifle? If you only do some of the steps, which ones and why?
__________________
If you're gonna be dumb you better be tough.
Reply With Quote
  •   #2  
    Unread 02-10-2005, 04:18 PM
    dcb dcb is offline
    Bronze Member
     
    Join Date: Jun 2004
    Location: Ohio
    Posts: 47
    Re: New Brass

    I trim to length. de-bur inside out also debur the flash holes.
    Neck size to streighten out any dents on the necks.
    on some brass like winchester or remington I check the primer holes to make sure there all in the middle.
    shoot and form to the chamber they will be used for. [img]/ubbthreads/images/graemlins/tongue.gif[/img]
    Reply With Quote

      #3  
    Unread 02-11-2005, 08:34 PM
    Silver Member
     
    Join Date: Sep 2004
    Location: Southwestern Montana
    Posts: 294
    Re: New Brass

    Thanks for the reply. I wash, deburr the flash hole, dress the primer pocket, partial resize for the neck only, champfer and load er up for a fire forming. The whole process is performed after the first firing. This only includes triming to length and full length resize additional. I don't neck turn at this time and I don't sort brass by wieght and all that other BR stuff. I think I would like to get into it that much but have not as of yet.
    __________________
    If you're gonna be dumb you better be tough.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: New Brass
    Thread Thread Starter Forum Replies Last Post
    338 Lapua Brass compared to 300 Remington Ultra Brass DANTEC Rifles, Bullets, Barrels & Ballistics 6 02-29-2012 11:43 PM
    Group differences in Weatherby Brass versus new Norma Brass TX mountain hunter Long Range Hunting & Shooting 5 12-29-2010 10:17 PM
    25-06 reloading dies, brass, and bullets / 45ACP brass jeffro Reloading Equipment and Components 1 05-01-2010 10:51 AM
    338 Edge, Brass life test. Rem 300RUM brass AJ Peacock Reloading 15 12-30-2009 12:26 PM
    Nosler Brass cosmetic seconds good brass? sambo3006 Reloading 6 01-04-2007 08:57 PM


    All times are GMT -5. The time now is 09:55 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC