Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

need suggestions for 300wm

 
LinkBack Thread Tools Display Modes
  #1  
Old 10-15-2007, 07:42 PM
Junior Member
 
Join Date: Jul 2006
Posts: 5
need suggestions for 300wm

My son has a remington 700 in 300wm. He's away on a job and asked me to work up a good deer load for him. He sent me a box of Barnes 180 grn TSX boattails. I'm guessing that R22 will be the powder of choice.
Anybody have a favorite load using these bullets and R22? Right now I'm a little pressed for time so I'd really appreiciate finding a good accurate load right off the bat. Thanks, Dave
Reply With Quote
  #2  
Old 10-15-2007, 08:13 PM
Gold Member
 
Join Date: Dec 2006
Location: FREE RUN, MS
Posts: 774
I use RL22 with the 168 TSX and 180 Accubound i cant get you my load its in the shop and its pouring rain but will post up Barnes data for you here it comes next post.
__________________
MEMBER "AM STRIKEFORCE"
Reply With Quote
  #3  
Old 10-15-2007, 08:34 PM
Gold Member
 
Join Date: Dec 2006
Location: FREE RUN, MS
Posts: 774
Bullet Weight: 180 gr Case Trim Length: 2.610"
Bullet Style: MRX BT Primer: Federal GM215M
COAL: 3.340" Barrel Length: 24"
Case: Winchester Twist Rate: 1:10"
Bullet Weight: 180 gr Case Trim Length: 2.610"
Bullet Style: TSX BT Primer: Federal GM215M
COAL: 3.340" Barrel Length: 24"
Case: Winchester Twist Rate: 1:10"
Powder Charge Velocity Charge Velocity Load
Brand (grains) (fps) (grains) (fps) Density (%)
IMR 4350 63.0 2746 69.0 2978 94
H4350 59.0 2715 65.5 2939 86
Hunter 63.0 2735 70.5 2984 88
RL 19 65.0 2790 72.5 3036 96
♦ IMR 4831 65.0 2784 71.0 2995 97
H4831SC 65.0 2716 72.0 2944 95
RL 22 67.0 2803 73.0 3009 96
IMR 7828SSC 68.0 2773 74.0 2972 94
H1000 72.0 2758 77.0 2902 101
Magnum 77.0 2765 81.5 2908 99


Shoot me an email thats the only way I could get this posted. I like to start the Barnes about .025 off the lands seems to work well They like a jump in the ones Ive used anyway.
__________________
MEMBER "AM STRIKEFORCE"
Reply With Quote
  #4  
Old 10-16-2007, 11:53 AM
Silver Member
 
Join Date: Aug 2006
Location: corpus christi tx
Posts: 424
mine likes 79gr 4831 and the 180 ab seated at 3.34 av vel 3106 es 13 sd 6 this is a hot load so i would start at 72gr and work up even though i have not had any pressure signs this out of a 26 in hart barrel it will group under 1/2 in my rifle
__________________
stxhunter
Reply With Quote
  #5  
Old 10-16-2007, 12:56 PM
Silver Member
 
Join Date: Apr 2007
Location: Georgia
Posts: 453
I use 78.5 gr of H4831sc great load. with the RL22 i use 79.5 both are good loads.My gun like the H4831sc better for some reason.Both loads are AOL 3.34

Good Luck let us know how it works out
__________________
“If you keep doing what you’re doing, you’ll keep getting what you’re getting.”
Reply With Quote
  #6  
Old 10-16-2007, 01:10 PM
Gold Member
 
Join Date: Dec 2006
Location: FREE RUN, MS
Posts: 774
Im shooting 76 4831Sc with the 180 AB also...

HEY I HAD THE WRONG LOAD HERE!

The load I post with 78.5 was with a 168 TSX..
__________________
MEMBER "AM STRIKEFORCE"

Last edited by NYLES; 10-18-2007 at 12:22 PM.
Reply With Quote
  #7  
Old 10-17-2007, 01:27 PM
Silver Member
 
Join Date: May 2004
Location: North Louisiana
Posts: 219
I can't believe you fellas are getting to nearly 79 grns with H4831 and 180s. Book Max is 73 and I get a sticky bolt when going over 74. I bet your pressures are very high.

Good Luck

Reloader
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: need suggestions for 300wm
Thread Thread Starter Forum Replies Last Post
Need 6.5 rem mag suggestions Blacktail Reloading 1 06-20-2011 08:20 PM
Gun suggestions and why. 300-shooter Long Range Hunting & Shooting 11 11-16-2009 07:35 PM
300 RUM or 338 RUM suggestions wasgas Long Range Hunting & Shooting 8 11-16-2009 07:16 PM
.223 suggestions maverick2 Rifles, Bullets, Barrels & Ballistics 11 06-02-2009 11:07 AM
Any good load suggestions for 300WM and 190MK? jcpython357 Rifles, Bullets, Barrels & Ballistics 7 02-19-2004 04:23 PM


All times are GMT -5. The time now is 04:06 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC