Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Need loads for Wildcat 325 grain in 338 Lapua

LinkBack Thread Tools Display Modes
Unread 10-06-2007, 02:28 PM
Gold Member
Join Date: Jul 2006
Posts: 630
Need loads for Wildcat 325 grain in 338 Lapua

Anybody (Kirby?) have any load for this weight in the Lapua. I generally use retumbo, but I also have some H1000 and IMR 4350. These 3 powders have worked great with 300 smk's.

Member 7MM STW Club
Reply With Quote

Unread 10-07-2007, 11:33 PM
Silver Member
Join Date: Jul 2005
Location: Juneau, Alaska
Posts: 213

Sorry, no specific help but I would think US 869 might be a good one to try. I was wondering too, will a 1:10" twist stabilize that bullet? I just started working with the 300 gr smk in mine, haven't tried a w/c yet.

"Fenced yards ain't hole cards and like as not never will be, reason for rhymers and old five and dimers like me."
Willie Nelson
Reply With Quote
Unread 10-09-2007, 06:29 PM
Platinum Member
Join Date: Feb 2005
Location: USA
Posts: 2,598
Try 86 grains of H-1000.................
range it,check the wind, dial in correction, aim and only one shot
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Need loads for Wildcat 325 grain in 338 Lapua
Thread Thread Starter Forum Replies Last Post
7mm RUM 200 gr Wildcat loads bailey1474 Reloading 10 05-02-2012 04:58 PM
200 Grain Wildcat on coyote Ernie Rifles, Bullets, Barrels & Ballistics 1 12-13-2006 01:08 AM
200 grain Wildcat 7STW load data Freebore Reloading 6 10-23-2006 07:08 AM
200 Grain Wildcat - so far so good ss7mm Rifles, Bullets, Barrels & Ballistics 34 07-23-2005 08:02 AM
68 grain 30cal Wildcat bailey1474 Reloading 13 03-16-2005 08:59 AM

All times are GMT -5. The time now is 10:46 AM.

All content ©2010-2015 Long Range Hunting, LLC