Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

Need loads for 300 SAUM

 
LinkBack Thread Tools Display Modes
  #1  
Old 08-02-2009, 07:51 PM
Gold Member
 
Join Date: Dec 2008
Posts: 867
Need loads for 300 SAUM

Anyone have any data for 300 saum 180 grain acc. bond or Barnes 165 triple shock. Thanks,
Mike
Reply With Quote
  #2  
Old 08-02-2009, 08:41 PM
436 436 is offline
Gold Member
 
Join Date: Mar 2009
Location: NorthWest
Posts: 561
Re: Need loads for 300 SAUM

For what it’s worth; I was using H4831SC {63.5grs} in a 28” inch barrel with 190gr. Sierra Match King, and turning in a very strong 2950 fps. Primer Fed 215 M; case Rem. This was a very accurate load for 1k shooting’…, with no pressure. You might think about working with H4831SC
Good luck.

436
Reply With Quote
  #3  
Old 08-02-2009, 09:09 PM
Gold Member
 
Join Date: Dec 2008
Posts: 867
Re: Need loads for 300 SAUM

I have factory 24" today shooting the 180's shot 2 groups 61 grains H-4350 3 shot at 100 .960 Second 62 grains H-4350 1.139 vel. 2870. I have some IMR 7828 thinking of trying it any in put. I loaded up for next time out some at 63 and 64 grains of H-4350. Tried 1 group of the Barnes 165 63 grins of H-4350 1.172 at 2979.
Mike
Reply With Quote
  #4  
Old 08-03-2009, 11:48 AM
436 436 is offline
Gold Member
 
Join Date: Mar 2009
Location: NorthWest
Posts: 561
Re: Need loads for 300 SAUM

I didn’t use the cartridge full potential in its velocity range; I wanted the accuracy end of the envelope and sometimes you have to slow it down a little; so once I found that’…., H-4831SC gave me the best accuracy with enough velocity to reach 1k with speed left over... that’s were I stopped.
It was also much easier on the rifles barrel giving longer life. I considered IMR4831 {more speed but also higher pressure} but in the past that’s always been a little to fast for other application where H4831SC worked.
Two powders I have on my shelf’…, I was going to use but never got around to was, RL-17 and Hodgdon Hybrid
The RL-17 looks like it could be a real sleeper here…. It’s an over bore powder with a great pressure curve.
The Hybrid has a burn rate between H-4350 and H4831; man that’s just got to be good, as well as having another low pressure curve.
You might think about giving them both a try; if I was shooting the .300 RSAUM now for 1k or wanted the best hunting loads I think this is where I go.
436
Reply With Quote
  #5  
Old 08-07-2009, 03:00 PM
Silver Member
 
Join Date: Jul 2007
Posts: 134
Re: Need loads for 300 SAUM

I have had good luck with 165 TSX and Reloader 17. I get 3/4 to 1" groups with 64 gr of R-17. This load is going 3130 FPS. This is close to MAX in my rifle so work up....
Reply With Quote
  #6  
Old 08-07-2009, 04:28 PM
Bronze Member
 
Join Date: Jan 2009
Location: ne pa
Posts: 55
Re: Need loads for 300 SAUM

I had good luck with imr 4007 ssc. 65gr w/ 168 sierra hpbt match. Factory model 7 3125fps 3/4''.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Need loads for 300 SAUM
Thread Thread Starter Forum Replies Last Post
300 SAUM pet loads DavidW Reloading 6 12-30-2010 02:23 PM
300 SAUM loads and suggestions Blacktail Rifles, Bullets, Barrels and Ballistics 7 03-17-2010 05:11 PM
looking for loads for 300 Rem SAUM stafford6624 Reloading 6 11-19-2008 06:05 AM
Need loads for 300 SAUM bobinpa Reloading 1 10-27-2008 08:01 PM
Does anyone have some favorite loads for the 7mm SAUM? ECC Reloading 2 09-06-2005 08:47 PM

Current Poll
Have You Ever Backpack Hunted?
YES - 62.38%
1,066 Vote
NO - 37.62%
643 Votes
Total Votes: 1,709
You may not vote on this poll.

All times are GMT -5. The time now is 06:48 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC