close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

A neck turning question

LinkBack Thread Tools Display Modes
  #1  
Unread 03-11-2005, 08:07 PM
 
Posts: n/a
A neck turning question

I have begun to do some neck turning. My question is this. If you set up to just clean the necks..Is it normal to have a case or two that the entire neck gets turned. After Measuring..They are all the same but some got 80% cleaned up some got 100% turned.

Thanks in advance

Joe
Reply With Quote
  •   #2  
    Unread 03-11-2005, 09:47 PM
     
    Posts: n/a
    Re: A neck turning question

    My 6.5-284 with a .294 neck using Lapua brass has most of the necks the way you described yours. The majority are around 75-80% turned with some 100%.
    Wayne
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: A neck turning question
    Thread Thread Starter Forum Replies Last Post
    Neck turning question longrangebo Reloading 1 04-04-2007 09:22 AM
    Question about neck turning bweber Reloading 14 12-21-2006 06:05 PM
    neck turning question sscoyote The Basics, Starting Out 8 07-30-2003 07:40 AM
    Question about neck turning & necking down JBT Rifles, Bullets, Barrels & Ballistics 5 05-02-2003 06:37 PM
    Neck Turning Question tourguide Rifles, Bullets, Barrels & Ballistics 1 11-24-2001 12:05 AM


    All times are GMT -5. The time now is 05:40 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC