Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Techniques For Reloading


Reply

Neck sizeing die.How to use.

 
LinkBack Thread Tools Display Modes
  #15  
Old 06-27-2008, 06:50 AM
Platinum Member
 
Join Date: Apr 2003
Location: North Bend, Oregon
Posts: 1,224
That is exactly what I was trying to say. For hunting I cycle them all long before I ever get in the heat of it. In all my years of neck sizing it has never been an issue.

I wonder if and suspect from what I have gathered over the years is red line loads fired in a non-trued/non-blueprinted Remington stretch much more than they do in my Weatherby or Ruger rifles do therby leading to a hunt ending stuck bolt or broken rifle. When I was 16 I had to use a boot, branch, 2x4, rubber mallet, etc, more than a few times to open the bolt on some of my early, "let the big dog eat," experimental loads in the Ruger 7Mag of mine. That was even on brand new brass. The sticky bolt lift was surely from super excessive loads rather than resizing. If I tried that treatment to a Remington 700 I would have been out of business as either the extractor or bolt handle would surely have failed. I have since out grown trying to make my guns more than what they are at the loading bench. I could surely live with a Remington now in a custom. I never was into customs due to perceived cost but due to this site have learned better.

Let me say it again before anyone thinks I'm trolling for a "my gun is better war" or a Ruger or Weatherby debate, I am not. There is nothing wrong with Remington actions. I have seen and shot some extremely nice Remingtons including one of Kirby's extreme 270 Allen Mags and shot better 500 yard groups with it than any of my store bought junk.
__________________
Build a man a fire and you heat him for a day.
Set him on fire and you heat him for life.

Only accurate rifles are interesting.

Gordy and Brady.
Reply With Quote

  #16  
Old 06-29-2008, 11:43 AM
Junior Member
 
Join Date: Jul 2003
Location: San Jacinto CA.
Posts: 12
Resizing 300 Rum

To JohnnyK
Thanks so much for your help. I tried sizing like you said. It worked like a charm. All of my cases are less than .002 out of concentric. Most are .001. All I need to do now is load and
shoot groups.
Thanks again Larry G B
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Neck sizeing die.How to use.
Thread Thread Starter Forum Replies Last Post
You might be a red neck if...... jmason General Discussion 109 08-26-2010 07:54 AM
WTB 6mm rem neck die 22brguy Reloading Equipment and Components 0 08-05-2010 11:21 PM
lee neck die little black 243 Reloading 4 10-04-2009 11:43 PM
300 RUM reamer .333 (tight neck) neck diameter F/S Michael Eichele Other Stuff For Sale 1 05-28-2009 10:44 PM
Sizeing without expander ball cabelas90 Reloading 12 03-05-2009 09:18 PM


All times are GMT -5. The time now is 08:26 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC