close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets

Reply

Neck and body die sequence

LinkBack Thread Tools Display Modes
  #8  
Unread 05-21-2008, 06:21 AM
Platinum Member
 
Join Date: Dec 2001
Posts: 1,060
I figured the question may of been answered here in the question about arbor press dies.

You neck size at some point cases will start to get hard to chamber so you use the body die which act as the FL sizing die. If you use the body die every time you should buy the Redding Type S FL die and save a reloading step on 6br site outfit called JLC changes the Redding body die over to a bushing die.
__________________
VFW
Reply With Quote
  •   #9  
    Unread 05-24-2008, 06:34 AM
    Silver Member
     
    Join Date: Oct 2004
    Location: Atlanta, GA
    Posts: 309
    Sequence:

    Sir, I apologize for slow response but the exact and correct answer , directly from the manufacturer, is body die first then neck size. Cordially, Overbore
    __________________
    Member, Revolutionary War Veterans Association
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Neck and body die sequence
    Thread Thread Starter Forum Replies Last Post
    What is your sequence? Walker1 Reloading 13 11-22-2010 02:07 PM
    Neck Bushing and Body Dies or FL Bushing Die??? MontanaRifleman Reloading 10 07-14-2009 07:29 AM
    Case selection/prep sequence winelines Reloading 6 04-30-2009 07:05 PM
    Action screw tightening sequence specweldtom Gunsmithing 6 02-02-2008 04:18 PM
    WTB: K&M Neck turner Body johnalan Reloading Equipment and Components 0 08-26-2007 08:29 AM


    All times are GMT -5. The time now is 06:19 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC