Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Reloading

Reloading Berger Bullets


Major runout problem.

LinkBack Thread Tools Display Modes
Unread 05-06-2010, 12:29 AM
Junior Member
Join Date: Apr 2006
Posts: 8
Re: Major runout problem.

The trick previously mentioned for seating bullets with less runout also works for neck runout. After sizing, rotate the case 180 degrees in the shellholder and resize again. Try that on a few cases and if it reduces runout at the neck it might be time to buy different dies.

Reply With Quote
  •   #16  
    Unread 05-06-2010, 09:28 PM
    Silver Member
    Join Date: Oct 2008
    Location: Bryan, Tx
    Posts: 284
    Re: Major runout problem.

    Neck turning brass has in my hands increased runout on new and once fired brass unless sorted by neck variance first. This disappears once "fireformed" as Ray suggests. I have loaded new brass with 5-9 thou runout that shot better than once fired brass with 1-2 thou runout. Is this increased run out making a difference on paper or is this just a theoretical, hypothetical trifle?
    Reply With Quote



    Thread Tools
    Display Modes

    Similar Threads for: Major runout problem.
    Thread Thread Starter Forum Replies Last Post
    First major boo boo bman73 Reloading 24 08-23-2011 11:26 PM
    Major lapping.... Talley lightweight rings Nikolakangrga Long Range Hunting & Shooting 7 08-17-2011 11:23 PM
    Major velocity loss Ultramag45 Rifles, Bullets, Barrels & Ballistics 6 11-12-2010 05:35 PM
    Savage VLP major stock modifications LEFTYM77 Gunsmithing 3 09-09-2008 03:48 PM
    runout problem with sizer die rufous Rifles, Bullets, Barrels & Ballistics 10 06-23-2002 09:18 PM

    All times are GMT -5. The time now is 10:38 AM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC